Command line application interpreter that contains some neural networks - related commands. More...

Inheritance diagram for IG.Lib.NeuralApplicationInterpreter:

Collaboration diagram for IG.Lib.NeuralApplicationInterpreter:

Public Member Functions
	NeuralApplicationInterpreter ()

	NeuralApplicationInterpreter (bool caseSensitive)

Public Member Functions inherited from IG.Lib.CommandLineApplicationInterpreter
	CommandLineApplicationInterpreter ()
	Creates a new MessyApplication object initialized with some basisc applications. More...

	CommandLineApplicationInterpreter (bool caseSensitive)
	Construct a new commandline interpreter object initialized with some basisc commands. More...

CommandThreadBase	GetCommmandThread (int whichCommandThread)
	Returns the specified command thread for the current interpreter. More...

CommandThread	AddNewThread ()

InterpreterVariable	GetLocalVariable (CommandThread cmdThread, string varName, int framesBelowTop)
	Returns local variable with the specified name that is defined specified number of frames below the top stack frame. More...

InterpreterVariable	GetFirstLocalVariable (CommandThread cmdThread, string value)

InterpreterVariable	GetFiestLocalOrGlobalVariable (CommandThread cmdThread, string value)

virtual InterpreterVariable	GetGlobalVariable (string varName)
	Returns the specified global variable, if such a variable exists. More...

virtual string	GetGlobalVariableValue (string varName)
	Returns value of the specified global variable, if such a global variable exists. More...

virtual void	SetGetGlobalVariableValue (string varName, string varValue)
	Assigns value to the specified global variable, if such a global variable exists. More...

virtual string	GetVariableValue (CommandThread cmdThread, string varName)
	Returns the value of the specified variable of the current command line interpreter. null is returned if the specified variable does not exist. More...

virtual string	SetVariableValue (CommandThread cmdThread, string varName, string value)
	Sets the specified variable to the specified value. More...

virtual string	ClearVariable (CommandThread cmdThread, string varName)
	Clears (removes) the specified variable. More...

virtual string	PrintVariable (CommandThread cmdThread, string varName)
	Prints the specified variable. More...

virtual void	EnterBlock (CommandThread cmdThread, bool executeCommands=true, bool saveCommands=false)
	Enters a new code block. A new stack frame is added where code is executed, such that the embedded code block has isolated local variables. More...

virtual string	ExitBlock (CommandThread cmdThread)
	Exits the current code block. More...

virtual void	EnterRepeatBlock (CommandThread cmdThread, int numRepetitions=1)
	Enters a new repeat code block. A new stack frame is added where code is executed, such that the embedded code block has isolated local variables. More...

virtual string	ExitRepeatBlock (CommandThread cmdThread)
	Exits the current repetition code block. More...

virtual void	EnterJsBlock (CommandThread cmdThread)
	Enters a new JavaScript calculator's code block. A new stack frame is added, such that the embedded code block collects command lines independently of the containing blocks, and lines can be later concatenated into a single string and sent to JavaScript evaluator when the block exits. More...

virtual string	ExitJsBlock (CommandThread cmdThread)
	Exits the current JavaScript code block, and sends the JavaScrit code contained within the block (consisting of concatenated command lines entered within the block) to the JavaScript evaluator for execution. More...

virtual void	EnterIf (CommandThread cmdThread, bool condition)
	Enters the If block. More...

virtual void	EnterElseIf (CommandThread cmdThread, bool condition)
	Enters the ElseIf block. More...

virtual void	EnterElse (CommandThread cmdThread)
	Enters the ElseIf block. More...

virtual string	ExitIf (CommandThread cmdThread)
	Enters the EndIf block. More...

virtual void	EnterWhile (CommandThread cmdThread, string conditionString)
	Enters the While block. More...

virtual string	ExitWhile (CommandThread cmdThread)
	Exits the current JavaScript code block, and sends the JavaScrit code contained within the block (consisting of concatenated command lines entered within the block) to the JavaScript evaluator for execution. More...

virtual string[]	GetArguments (string commandLine)
	Parses a command line and extracts arguments from it. Arguments can be separated according to usual rules for command-line arguments: spaces are separators, there can be arbitraty number of spaces, and if we want an argument to contain spaces, we must enclose it in double quotes. Command line can also contain the command name followed by arguments. In this case it is treated in the same way, and command can be obtained simply as the first string in the returned array. More...

virtual string	RunFile (CommandThread cmdThread, string filePath)
	Runs all commands that are written in a file. Each line of a file is interpreted as a single command, consisting of command name followed by arguments. More...

virtual string	RunInteractive (CommandThread cmdThread)
	Reads commands one by one from the standard input and executes them. More...

string	EvaluateJsInteractive ()
	Runs interpreter's JavaScript expression evaluator interactively. More...

string	EvaluateJs (string codeBlock)
	Evaluates the specified block of code by the internal JavaScript evaluator. More...

string	EvaluateJs (string[] args)
	Evaluates a JavaScript expression obtained by merging elements of the array parameter args . These usually represent parts of the code block to evaluate, obtained through command arguments or as commandlines read (but not executed) by the commandline interpreter. More...

string[]	GetCommands ()
	Returns an array of installed commands. More...

bool	ContainsCommand (string commandName)
	Returns true if the specified command is installed on the interpreter, false if not. More...

virtual string	RunRepeat (CommandThread cmdThread, string[] args)
	Runs command several times where the first argument is number of repetitions, second argument is command name. Extracts command name and runs the corresponding command delegate. Before running it, arguments for the application delegate are extracted and then passed to the delegate. More...

virtual string	RunRepeatVerbose (CommandThread cmdThread, string[] args)
	Runs command several times where the first argument is number of repetitions, second argument is command name. Extracts command name and runs the corresponding command delegate. Before running it, arguments for the application delegate are extracted and then passed to the delegate. More...

virtual string	RunRepeatSilent (CommandThread cmdThread, string[] args)
	Runs command several times where the first argument is number of repetitions, second argument is command name. Extracts command name and runs the corresponding command delegate. Before running it, arguments for the application delegate are extracted and then passed to the delegate. More...

virtual string	RunRepeatSpecificOutputLevel (CommandThread cmdThread, string[] args)
	Runs command several times where the first argument is number of repetitions, second argument is command name. Extracts command name and runs the corresponding command delegate. Before running it, arguments for the application delegate are extracted and then passed to the delegate. More...

virtual string	RunRepeat (CommandThread cmdThread, int outputLevel, string[] args)
	Runs command several times where the first argument is number of repetitions, second argument is command name. Extracts command name and runs the corresponding command delegate. Before running it, arguments for the application delegate are extracted and then passed to the delegate. More...

virtual string	RunTryCatch (CommandThread cmdThread, int outputLevel, string[] args)
	Runs command in a try-catch block, where first argument is command name. Extracts command name and runs the corresponding command delegate. Before running it, arguments for the application delegate are extracted and then passed to the delegate. More...

virtual void	Run (CommandThread cmdThread, List< string > commandLines)
	Runs a set of command by the current interpreter. More...

string	RunWithoutModifications (CommandThread cmdThread, string commandName, params string[] commandArguments)
	Runs the specified command with specified name, installed on the current application object, without any modifications of the command arguments. More...

virtual string	Run (CommandThread cmdThread, string commandName, params string[] commandArguments)
	Runs the specified command with specified name, installed on the current application object. More...

string	Run (CommandThread cmdThread, string[] args)
	Runs command where the first argument is command name. Extracts command name and runs the corresponding command delegate.Before running it, arguments for the application delegate are extracted and then passed to the delegate. More...

string	Run (CommandThread cmdThread, string commandLine)
	Runs command that is specified as a single string, composed of command name and its argumens. Splits the command and runs it. More...

virtual string	Run (string command)
	Runs the specified (unsplit) command on the interpreter's main thread. More...

virtual string	Run (params string[] commandAndArgs)
	Runs the specified (split) command with arguments on the interpreter's main thread. More...

void	AddParallelCommand (CommandLineJobContainer commandData)
	Adds a new parallel command data to the list of commands executed by in parallel. More...

CommandLineJobContainer	GetParallelCommandData (int id)
	Returns the command data object of the parallel command that with the specified ID. More...

void	PrintParallelCommands (bool printAll)
	Prints the commands that were scheduled for parallel execution, together with their current status, results and execution times (when available). More...

virtual void	UpdateThreadPriorityFromSystem ()
	Updates thread priority (property ThreadPriority) of the interpreter to the current global thread priority (the UtilSystem.ThreadPriority property). More...

void	RegisterSystemPriorityUpdating ()
	Registers the UpdateThreadPriorityFromSystem method as "event handler" for system priority changes. After registration, this method will be called every time the value of the UtilSystem.ThreadPriority property changes. More...

void	UnregisterSystemPriorityUpdating ()
	Unregisters the UpdateThreadPriorityFromSystem method as "event handler" for system priority changes. More...

int[]	RunParallelRepeat (int numRepeat, string command, string[] commandArguments)
	Runs the specified command with arguments the specified number of times in parallel threads by using the interpreter's job dispatcher with corresponding parallel servers. More...

int	RunParallel (string command, string[] commandArguments)
	Runs she specified command with arguments once in a parallel thread by using the interpreter's job dispatcher with corresponding parallel servers. More...

virtual string	RunAsync (CommandThread cmdThread, string[] args)
	Runs a command asynchronously where the first argument is command name. Extracts command name and runs the corresponding application delegate. Before running it, arguments for the application delegate are extracted and then passed to the delegate. More...

virtual string	RunAsync (CommandThread cmdThread, string commandName, params string[] commandArguments)
	Runs the command with specified name (installed on the current interpreter object) asynchronously. More...

bool	AsyncIsCompleted (int id)
	Returns true if the asynchronous command execution identified by id has completed, and false otherwise. More...

bool	AsyncIsAllCompleted ()
	Returns true if all asynchronous command executions have completed, and false otherwise. More...

void	AsyncWaitAll ()
	Waits until all asynchronously commands that have been eventually executed by the current interpreter, complete. More...

string	AsyncWait (int callId)
	Waits for the specified asynchronous command (specified by command ID) to complete. More...

virtual void	AddCommand (string commandName, ApplicationCommandDelegate commandDelegate)
	Adds command with the specified name. More...

virtual void	AddCommand (string commandName, ApplicationCommandDelegateMt commandDelegate)
	Adds command with the specified name. More...

virtual void	AddCommandMt (string commandName, ApplicationCommandDelegateMt commandDelegate)
	Adds command with the specified name. More...

virtual void	RemoveCommand (string commandName)
	Removes the command with the specified name. More...

virtual void	RemoveAllCommands ()
	Removes all commands from the current interpreter. More...

virtual void	AddModule (string moduleName, ModuleDelegate moduleDelegate)
	Adds a new module to the interpreter. This adds an initialization function (via a delegate) which is executed when module module initialization is performed. More...

virtual void	LoadModule (string moduleName)
	Loads and initializes the specified module. More...

virtual string	ModuleTestCommandName (string modulename)
	Returns the standard name for the command that gets installed when a module is loaded. More...

virtual bool	IsModuleLoaded (string moduleName)
	Returns true if the specified module has been loaded on the interpreter, false if not. More...

virtual string	RunScriptFile (string scriptFilePath, string[] initAndRunArgs)
	Dynamically loads (temporarily, just for execution of the current commad) a class form the script contained in the specified file and executes its executable method. The file must contain the script that is dynamically loaded and executed, in form of definition of the appropriate class of type ILoadableScript. The dynamically loadable script class is loaded from the file and instantiated by the LoadableScriptInterpreter interpreter that is based on loadable scripts. More...

void	LoadScript (string newCommandName, string scriptFilePath, string[] initArgs)
	Dynamically loads (compiles and instantiates) a loadable script class contained in the specified file, and installs a new command on LoadableScriptInterpreter and on the current interpreter, based on the dynamically created instance of the loaded (dynamically compiled) class. More...

virtual string	RunLoadedScript (string commandName, string[] arguments)
	Executes the specified command that has been dynamically loaded form a script. More...

string[]	GetLoadableScriptReferencedAssemblies ()
	Returns an array of assemblies that are currently referenced by the script loader that takes care of loading the dynamic scripts. More...

InterpreterPipeServer	CreatePipeServer (string pipeName, string serverName=null, bool createCommand=false, int outputLevel=3)
	Creates and registers a new interpreter's named pipe server. More...

string	RemovePipeServers (params string[] serverNames)
	Removes the specified interpreter's named pipe servers. Servers are stopped and their pipes closed. Returns a string contaiing information about the removed servers. More...

string	PipeServerInfo (string serverName=null)
	Returns a string containing informattion on the installed named pipe servers. More...

InterpreterPipeClient	CreatePipeClient (string pipeName, string clientName=null, bool createCommand=false, int outputLevel=3)
	Creates and registers a new interpreter's named pipe client. More...

string	RemovePipeClients (params string[] clientNames)
	Removes the specified interpreter's named pipe clients. Client's pipes are closed. Returns a string contaiing information about the removed clients. More...

string	PipeClientInfo (string clientName=null)
	Returns a string containing informattion on the installed named pipe clients. More...

string	PipeClientGetServerResponse (string clientName, string commandLineString)
	Sends the specified command to the corresponding pipe serverr and reads and returns its response. More...

Public Member Functions inherited from IG.Lib.ICommandLineApplicationInterpreter
string	Run (CommandThread commandThread, string commandName, string[] args)
	Runs the command with specified name, installed on the current application object. More...

Protected Member Functions
override string	CmdAbout (CommandThread commandThread, string cmdName, string[] args)
	Execution method that prints some information about the application. More...

Protected Member Functions inherited from IG.Lib.CommandLineApplicationInterpreter
virtual void	InitCommandLineApplicationInterpreterBasic (bool caseSensitive)
	Performs basic initializations of the interpreter. More...

virtual void	InitCommands ()
	Installs basic commands on the interpreter. More...

virtual bool	IsVariableReference (CommandThread cmdThread, string str)
	Returns true if the specified string represents a variable reference, false otherwise. More...

virtual string	SubstituteVariableOrExpressionReference (CommandThread cmdThread, string str)
	Returns value of the referenced variable if the specified string represents a variable reference (begins with the variableStart character, usually '$'), otherwise the original sting is returned. More...

virtual void	AddEnterExitCommands_Block (CommandStackFrame frame)
	Adds block enter/exit commands for the "Block" block to the specified stack frame. More...

virtual void	AddEnterExitCommands_BeginRepeat (CommandStackFrame frame)
	Adds block enter/exit commands for the "BeginRepeat" block to the specified stack frame. More...

virtual void	AddEnterExitCommands_BeginCalc (CommandStackFrame frame)
	Adds block enter/exit commands for the "BeginCalc" block to the specified stack frame. More...

virtual void	AddEnterExitCommands_If (CommandStackFrame frame)
	Adds block enter/exit commands for the "If" block to the specified stack frame. More...

virtual void	AddEnterExitCommands_ElseIf (CommandStackFrame frame)
	Adds block enter/exit commands for the "ElseIf" block to the specified stack frame. More...

virtual void	AddEnterExitCommands_Else (CommandStackFrame frame)
	Adds block enter/exit commands for the "ElseIf" block to the specified stack frame. More...

virtual void	AddEnterExitCommands_While (CommandStackFrame frame)
	Adds block enter/exit commands for the "While" block to the specified stack frame. More...

virtual void	ExecuteSystemCommandsInteractive ()
	Reads commands with their arguments ont by one from the console and executes them as system commands. More...

virtual bool	GetCommandDelegate (string commandName, ref ApplicationCommandDelegateMt appDelegate)
	Obtains and stores the delegate that is used for execution of the specified command, and retrns an iindicator ehether the command is installed on the interpreter or not. More...

void	AsyncRunCallback (IAsyncResult ar)
	Callback method for asynchronous command executions. More...

virtual string	CmdSetVariableBase (CommandThread cmdThread, string cmdName, string[] args, bool setCommandResult)
	Command. Sets the specified interpreter variable to the specified value. Usage: More...

virtual string	CmdSetVariable (CommandThread cmdThread, string cmdName, string[] args)
	Command. Sets the specified interpreter variable to the specified value. Usage: More...

virtual string	CmdSetVariableToCommandResult (CommandThread cmdThread, string cmdName, string[] args)
	Command. Sets the specified interpreter variable to the result of the command (with arguments) that follow variable name. Usage: More...

virtual string	CmdGetVariable (CommandThread cmdThread, string cmdName, string[] args)
	Command. Gets the specified variable and returns its value (or null if the variable does not exist). Variable name must be the only argument of the command. More...

virtual string	CmdClearVariable (CommandThread cmdThread, string cmdName, string[] args)
	Command. Clears the specified variable. Variable name must be the only argument of the command. More...

virtual string	CmdPrintVariable (CommandThread cmdThread, string cmdName, string[] args)
	Command. Prints the specified variable. Variable name must be the only argument of the command. More...

virtual string	CmdThreadInfo (CommandThread cmdThread, string cmdName, string[] args)
	Command. Prints the specified variable. Variable name must be the only argument of the command. More...

virtual string	CmdThreadId (CommandThread cmdThread, string cmdName, string[] args)
	Command. Returns the interpreter's current executing thread Id. More...

virtual string	CmdStackLevel (CommandThread cmdThread, string cmdName, string[] args)
	Command. Returns the current interpreter's stack level for the currently executed interpreter thread. More...

virtual string	CmdSuppressInteractive (CommandThread cmdThread, string cmdName, string[] args)
	Command. Prints and returns or sets and returns value of the flag that specifies whether interactive helpers and outputs are suppressed at the thread level. More...

virtual string	CmdSuppressInteractiveFrame (CommandThread cmdThread, string cmdName, string[] args)
	Command. Prints and returns or sets and returns value of the flag that specifies whether interactive helpers and outputs are suppressed for the currentt stack frame (the effect of this setting vanished when the stack frame exits). More...

virtual string	CmdBlock (CommandThread cmdThread, string cmdName, string[] args)
	Command. Enters a new command block. Optional arguments specify whether commands in the block are readily executed, and whether they are saved (for later execution or inspection). More...

virtual string	CmdEndBlock (CommandThread cmdThread, string cmdName, string[] args)
	Command. Exits the current command block. Exception is thrown if we are not currently within a plain code block. More...

virtual string	CmdBeginRepeat (CommandThread cmdThread, string cmdName, string[] args)
	Command. Enters a new repeat block, which repeats execution of its body for the specified number of time and reports execution speed. Number of block execution repetitions must be specified as the only parameter of the command. More...

virtual string	CmdEndRepeat (CommandThread cmdThread, string cmdName, string[] args)
	Command. Exits the current repeat block, which repeats execution of its body for the specified number of time and reports execution speed. More...

virtual string	CmdCalcJsBlock (CommandThread cmdThread, string cmdName, string[] args)
	Command. Enters a new block of JavaScript expressions that are evaluated. All lines within the block are treated as part of JavaScript code block, which is evaluated by the interpreter's JavaScript evaluator when the end of the block is reached. More...

virtual string	CmdEndCalcJsBlock (CommandThread cmdThread, string cmdName, string[] args)
	Command. Exits the current JavaScript expression block. If execution is active then the block of commands is sent to the internal JavaScript evaluator for execution. More...

virtual string	CmdIf (CommandThread cmdThread, string cmdName, string[] args)
	Command. Prints the specified variable. Variable name must be the only argument of the command. More...

virtual string	CmdElseIf (CommandThread cmdThread, string cmdName, string[] args)
	Command. Prints the specified variable. Variable name must be the only argument of the command. More...

virtual string	CmdElse (CommandThread cmdThread, string cmdName, string[] args)
	Command. Prints the specified variable. Variable name must be the only argument of the command. More...

virtual string	CmdEndIf (CommandThread cmdThread, string cmdName, string[] args)
	Command. Ends the If/ElseIf/Else block. Variable name must be the only argument of the command. More...

virtual string	CmdWhile (CommandThread cmdThread, string cmdName, string[] args)
	Command. Enters the while block. Arguments represent loop contioton that is evaluated at the begining of each iteration. Variable name must be the only argument of the command. More...

virtual string	CmdEndWhile (CommandThread cmdThread, string cmdName, string[] args)
	Command. Ends (closes) the while loop. Variable name must be the only argument of the command. More...

virtual string	CmdOutputLevel (CommandThread cmdThread, string cmdName, string[] args)
	Command. Prints or sets the current output level of the interpreter. More...

virtual string	CmdOutputLevelCalc (CommandThread cmdThread, string cmdName, string[] args)
	Command. Prints or sets the current output level of the calculator (i.e., the JavaScript expression evaluator). More...

virtual string	CmdUseJint (CommandThread cmdThread, string cmdName, string[] args)
	Command. Prints and returns or sets and returns value of the flag that specifies whether the Jint engine is used to interpret JavaScript expressions. More...

virtual string	CmdWriteLine (CommandThread cmdThread, string cmdName, string[] args)
	Command. Prints concatenated argument with spaces between them. More...

virtual string	CmdWrite (CommandThread cmdThread, string cmdName, string[] args)
	Command. Prints concatenated argument with spaces between them. More...

virtual string	CmdRead (CommandThread cmdThread, string cmdName, string[] args)
	Command. Reads value of the specified variable from console. Variable name must be the first argument; Eventual other arguments are concatenated and written to console. More...

virtual string	CmdRunFile (CommandThread cmdThread, string cmdName, string[] args)
	Command. Runs a file by running all its lines in the current interpreter. File name must be the only argument of the command. More...

virtual string	CmdRunRepeatVerbose (CommandThread cmdThread, string cmdName, string[] args)
	Command. Runs another command repetitively the specified number of times. First argument must be the number of times command is run, the second argument must be command to be run repetitively, and the rest of the arguments are passed to that command as its arguments. More...

virtual string	CmdRunRepeat (CommandThread cmdThread, string cmdName, string[] args)
	Command. Runs another command repetitively the specified number of times. First argument must be the number of times command is run, the second argument must be command to be run repetitively, and the rest of the arguments are passed to that command as its arguments. More...

virtual string	CmdTryRun (CommandThread cmdThread, string cmdName, string[] args)
	Command. Runs another command in a try-catch block, such that if command throws an exception execution is not broken. The second argument must be command to be run, and the rest of the arguments are passed to that command as its arguments. More...

virtual string	CmdThtrowExceptions (CommandThread cmdThread, string cmdName, string[] args)
	Command. Sets the flag for rethrowing exceptions in the interaction mode. Optional boolean arguemnt, default is true. More...

virtual string	CmdRunInteractive (CommandThread cmdThread, string cmdName, string[] args)
	Command. Runs interpreter commands interactively. Reads commands one by one from console and executes them, until only Enter is pressed. More...

virtual string	CmdRunSystem (CommandThread cmdThread, string cmdName, string[] args)
	Command. Runs the specified command-line by the operating system. The first argument is the command to be executed while the following arguments are arguments to this command. If there are no arguments then user is requested to insert commands interactively. More...

virtual string	CmdCurrentDirectory (CommandThread cmdThread, string cmdName, string[] args)
	Command. Rturns or sets the current directory. More...

virtual string	CmdExpressionEvaluatorJavascript (CommandThread cmdThread, string cmdName, string[] args)
	Command. Runs the built in expression evaluator. More...

virtual string	CmdSetPriority (CommandThread cmdThread, string cmdName, string[] args)
	Interpreter command. Sets the priority of the current process. More...

virtual string	CmdRunParallel (CommandThread cmdThread, string cmdName, string[] args)
	Interpreter command. Runs the specified command-line in parallel thread. More...

virtual string	CmdRunParallelRepeat (CommandThread cmdThread, string cmdName, string[] args)
	Interpreter command. Runs the specified command-line several times in the specified number of parallel threads. More...

virtual string	CmdPrintParallelCommands (CommandThread cmdThread, string cmdName, string[] args)
	Interpreter command. Prints data about commands executed in parallel threads. More...

virtual string	CmdRunAsync (CommandThread cmdThread, string cmdName, string[] args)
	Command. Runs the specified command-line asynchronously. More...

virtual string	CmdAsyncWaitResults (CommandThread cmdThread, string cmdName, string[] args)
	Command. Wait until asynchronously invoked command with the specified ID (first argument, must represent an int) completes. More...

virtual string	CmdAsyncCompleted (CommandThread cmdThread, string cmdName, string[] args)
	Command. Returns a flag indicating whether the asynchroneous command invocation identified by the specified ID (first argument, must represent an int) has completed. More...

virtual string	CmdSleepSeconds (CommandThread cmdThread, string cmdName, string[] args)
	Command. Sleeps (suspends execution of the executing thread) for the specified number of seconds. More...

virtual string	CmdLoadModule (CommandThread cmdThread, string cmdName, string[] args)
	Command. Loads the specified module (whos name must be the first argument) and performs its initialization. If there are more than 1 arguments then the rest of the arguments specify a command and (if more than 1) its arguments, and the specified command is also run. More...

virtual string	CmdIsModuleLoaded (CommandThread thread, string cmdName, string[] args)
	Executinon method for command that checks if module is loaded. Writes to condole whether module is loaded or not, and returns "1" if module is loaded and "0" if not. More...

virtual string	CmdModuleTestCommand (CommandThread cmdThread, string cmdName, string[] args)
	Executinon method for test command that is installed when a module is installed. This is a command that enables to verify that a module with the specified name has been installed. More...

virtual string	CmdTestFromTestModules (CommandThread cmdThread, string cmdName, string[] args)
	Executinon method for test command, which just prints its name and arguments. This is a replacement for usuel test command, which gets installed when one of the two basic test modules are installed. More...

virtual string	CmdPipeServerCreate (CommandThread cmdThread, string cmdName, string[] args)
	Command. Creates a new server that listens for interpreter commands on a named pipe, executes them, and writes result back to the named pipe. Command arguments are pipe name and server name (optional, if not specified then server name is the same as pipe name). More...

virtual string	CmdPipeServersRemove (CommandThread cmdThread, string cmdName, string[] args)
	Command. Removes the spcified (or all, if names are not specified) named pipe servers. Command arguments are names of the pipe servers to be removed. If none is specified then all pipe servers installed on the interperter are removed. More...

virtual string	CmdPipeServerInfo (CommandThread cmdThread, string cmdName, string[] args)
	Command. Prints and returns inormation on the installed named pipe servers. Optional command argument is server name. If not specified then information about all installed servers is printed and returned. More...

virtual string	CmdPipeClientCreate (CommandThread cmdThread, string cmdName, string[] args)
	Command. Creates a new client to the interpreter pipe server. The client can send command to the server listening on the specified named pipe, and recieves responses from the server and returns them. Command arguments are pipe name and client name (optional, if not specified then server name is the same as pipe name). More...

virtual string	CmdPipeClientsRemove (CommandThread cmdThread, string cmdName, string[] args)
	Command. Removes the spcified (or all, if names are not specified) named pipe clients. Command arguments are names of the pipe clients to be removed. If none is specified then all pipe clients installed on the interperter are removed. More...

virtual string	CmdPipeClientInfo (CommandThread cmdThread, string cmdName, string[] args)
	Command. Prints and returns inormation on the installed named pipe clients. Optional command argument is client name. If not specified then information about all installed clients is printed and returned. More...

virtual string	CmdPipeClientGetServerResponse (CommandThread cmdThread, string cmdName, string[] args)
	Command. Sends the specified command to the corresponding pipe serverr and reads and returns its response. Command argument is the (interpreter's) name of the pipe client followed by command and eventual arguments sent to the server. More...

virtual string	CmdRunInternalScriptClass (CommandThread cmdThread, string cmdName, string[] args)
	Interpreter command. Dynamically creates and runs an internal script object, i.e. an object of the class that is already compiled in the code. Interpreter command arguments: The first argument must be a full name of the script class whose object is run. The rest of the arguments (if any) are directly transferred to the executable method of the script and are also used as argument to script initialization method. More...

virtual string	CmdRunScriptFile (CommandThread cmdThread, string cmdName, string[] args)
	Interpreter command. Dynamically loads (temporarily, just for execution of the current commad) a class form the script contained in the specified file and executes its executable method. The file must contain the script that is dynamically loaded and executed, in form of definition of the appropriate class of type ILoadableScript. The dynamically loadable script class is loaded from the file and instantiated by the LoadableScriptInterpreter loadable script-based interpreter object. Interpreter command arguments: Path to the file containing loadable script must be the first argument to the method. The rest of the arguments (if any) are directly transferred to the executable method of the script. More...

virtual string	CmdLoadScript (CommandThread cmdThread, string cmdName, string[] args)
	Interpreter command. Dynamically loads (compiles and instantiates) a loadable script class contained in the specified file, and installs a new command on LoadableScriptInterpreter and on the current interpreter, based on the dynamically allocated instance of the loaded (dynamically compiled) class. Required arguments to the interpreter command are: More...

virtual string	CmdRunLoadedScript (CommandThread cmdThread, string cmdName, string[] args)
	Interpreter command. Runs a command based on dynamically loaded loadable script class. Arguments passed to this command are directly passed on to the dynamically loaded script class installed on LoadableScriptInterpreter under the same cmdName . Typically, the command that is executed by the current method, has been previously installed by the CmdLoadScript(...) method. More...

virtual string	WriteLoadableScriptReferencedAssemblies (CommandThread cmdThread, string cmdName, string[] args)
	Interpreter command. Writes to the console the assemblies that are currently referenced by compiler used for dynamic loading of scripts. This information can be used for control if something goes wrong with dynamic script loading. More...

virtual string	CmdExit (CommandThread cmdThread, string cmdName, string[] args)
	Execution method that exits the interpreter. More...

virtual string	CmdHelp (CommandThread cmdThread, string cmdName, string[] args)
	Execution method for applications help. More...

virtual string	CmdApplicationInfo (CommandThread cmdThread, string cmdName, string[] args)
	Execution method that prints some information about the current application. More...

virtual string	CmdComment (CommandThread cmdThread, string cmdName, string[] args)
	Execution method that does nothing (for comments). More...

virtual string	CmdPrintCommands (CommandThread cmdThread, string cmdName, string[] args)
	Execution method for command that prints names of all installed applications. More...

virtual string	CmdTestProduct (CommandThread cmdThread, string cmdName, string[] args)
	Executinon method for test command, which just prints its name and arguments. More...

virtual string	CmdTest (CommandThread cmdThread, string cmdName, string[] args)
	Executinon method for test command, which just prints its name and arguments. More...

virtual string	CmdTestSpeed (CommandThread cmdThread, string cmdName, string[] args)
	Executinon method for TestSpeed command, performs test of speed of numerical computations on LU decomposition, and outputs the result and comparison with reference results (usually achieved on Igor's computer). More...

virtual string	CmdTestSpeedLong (CommandThread cmdThread, string cmdName, string[] args)
	Executinon method for TestSpeedLong command, performs a longer test of speed of numerical computations on QR decomposition, and outputs the result and comparison with reference results (usually achieved on Igor's computer). More...

virtual string	CmdTestQR (CommandThread cmdThread, string cmdName, string[] args)
	Executinon method for TestQR command, performs test of QR decomposition. More...

virtual double	TestComputationalTimesQR (int numEq, int outLevel)
	Test of QR decomposition. Writes times necessary for all steps. More...

virtual string	CmdTestLU (CommandThread cmdThread, string cmdName, string[] args)
	Executinon method for TestLU command, performs test of LU decomposition. More...

virtual double	TestComputationalTimesLU (int numEq, int outLevel)
	Test of LU decomposition. More...

Additional Inherited Members
Static Public Member Functions inherited from IG.Lib.CommandLineApplicationInterpreter
static void	ExecuteSystemCommand (string[] args)
	Executes the specified system commmand and blocks until the execution completes. More...

static void	ExecuteSystemCommand (string command, params string[] args)
	Executes system command with arguments. More...

Public Attributes inherited from IG.Lib.CommandLineApplicationInterpreter
const bool	DefaultCaseSensitive = false
	Default value of the flg indicating whether command names are case sensitive. More...

const string	DefaultName = "ApplicationIntepreter"
	Default interpreter name. More...

const string	AutoGlobalName = "AutomaticGlobalInterpreter"

const string	AutoGlobalDescription = "Automatically created global command-line interpreter."

readonly string	Command_Block = "Block"

readonly string	Command_EndBlock = "EndBlock"

readonly string	Command_BeginRepeat = "BeginRepeat"

readonly string	Command_EndRepeat = "EndRepeat"

readonly string	Command_BeginCalc = "BeginCalc"

readonly string	Command_EndCalc = "EndCalc"

readonly string	Command_If = "If"

readonly string	Command_ElseIf = "ElseIf"

readonly string	Command_Else = "Else"

readonly string	Command_EndIf = "EndIf"

readonly string	Command_While = "While"

readonly string	Command_EndWhile = "EndWhile"

Static Public Attributes inherited from IG.Lib.CommandLineApplicationInterpreter
static int	DefaultOutputLevel = 1

static bool	DefaultWarnCommandReplacement = true

Protected Attributes inherited from IG.Lib.CommandLineApplicationInterpreter
bool	_caseSensitive = false

SortedDictionary< string, ApplicationCommandDelegateMt >	_commandsMt = new SortedDictionary<string, ApplicationCommandDelegateMt >()

CommandThread	_globalThread = null

CommandStackFrame	_globalAuxiliaryFrame = null

SortedDictionary< string, string >	_variables = new SortedDictionary<string, string>()

SortedDictionary< string, ModuleDelegate >	_modules = new SortedDictionary<string, ModuleDelegate>()

List< String >	_loadedModules = new List<string>()

string	_name = DefaultName

string	_sescription = "Application's command-line interpreter."

string	_description

char	_variableStart = '$'

char	_expressionStart = '#'

bool	_exit = false

int	_outputLevel = DefaultOutputLevel
	Default level of output for some of the interpreters' functionality (e.g. asynchronous command execution). More...

ExpressionEvaluatorJs	_evalutorJs

ExpressionEvaluatorJint	_evaluatorJint

string[]	_emptyCommandLine = { null }

List< CommandLineJobContainer >	_parallelCommands

ThreadPriority	_threadPriority = UtilSystem.ThreadPriority

bool	_systemPriorityUpdatesRegistered = false
	Whether the "event" handler for system priprity changes has already been registered. More...

int	_maxNumParallelServers = 0

string	_ModuleTestCommandPrefix = "TestModule_"

const string	TestSpeedReferenceSystem = "Intel Core i7 2.8 GHz"
	Description of reference configuration. More...

const int	TestSpeedNumEq = 500
	Number of equations used to test speed of numerical computations. More...

const double	TestSpeedReferenceTime = 0.640917
	Reference execution time for speed test for numerical operations. More...

const int	TestSpeedLongNumEq = 1000
	Number of equations used to test speed of numerical computations. More...

const double	TestSpeedLongReferenceTime = 63.9688
	Reference execution time for speed test for numerical operations. More...

Static Protected Attributes inherited from IG.Lib.CommandLineApplicationInterpreter
static List < CommandLineApplicationInterpreter >	_interpreters = new List<CommandLineApplicationInterpreter>()

static int	DefaultNumEquations = 1000

Properties inherited from IG.Lib.CommandLineApplicationInterpreter
bool	CaseSensitive `[get, protected set]`

object	Lock `[get]`
	This object's central lock object to be used by other object. Do not use this object for locking in class' methods, for this you should use InternalLock. More...

CommandStackFrame	GlobalFrame `[get]`
	Global frame where global variables are stored. More...

CommandThread	MainThread `[get, protected set]`
	Stack frames (containing variables) and other data for the main interpretation thread. More...

List< CommandThread >	CommandThreads `[get, set]`
	List of command threads that exist on the interpreter. More...

int	NumCommandThreads `[get]`
	Returns the number of command threads that are currently contained on the interpreter. More...

bool	Exit `[get, protected set]`
	Whether the exit flag is set, usually causing interpreter to stop. More...

static List < CommandLineApplicationInterpreter >	Interpreters `[get]`

static CommandLineApplicationInterpreter	Global `[get]`
	Global command-line interpreter. More...

string	Name `[get, set]`
	Name of the current interpreter. More...

string	Description `[get, set]`
	Description of hte current interpreter. More...

int	OutputLevel `[get, set]`
	Level of output for some of the interpreter's functionality (e.g. asynchronous command execution). More...

bool	WarnCommandReplacement `[get, set]`
	Specifies whether a wrning should be launched whenever an installed command is being replaced. More...

virtual bool	ThrowExceptions `[get, set]`
	Flag specifying whether exceptions are thrown in interactive mode or not. More...

bool	UseJint `[get, protected set]`
	Flag that specified whether Jint JavaCcript engine is used or not. More...

ExpressionEvaluatorJs	EvaluatorJs `[get, protected set]`
	Expression evaluator used by the current More...

string[]	EmptyCommandLine `[get]`

List< CommandLineJobContainer >	ParallelCommands `[get]`
	List where parallel commands are stored. More...

ThreadPriority	ThreadPriority `[get, set]`
	Priority of the current interpreter main thread and threads for executing the parallel commands. More...

int	MaxNumParallelServers `[get, set]`
	Maximal number of parallel servers allowed to be created for parallel command execution. More...

List< IAsyncResult >	AsyncCommandResults `[get]`
	List of IAsyncResult objects that were returned by asynchronous command invocations. More...

bool	AsyncEndInvokeInCallback `[get, set]`
	Flag indicating whether Endinvoke must be called in the callback of asynchronous command calls. More...

virtual LoadableScriptInterpreterBase	LoadableScriptInterpreter `[get, set]`
	Interpreter based on dynamically loadable scripts. This enables installation and running of commands that are based on C# code that is dynamically compiled. Ihe object is created on first get access if it has not been assigned before. This property can be overridden in derived classes such that getter creates a dynamically loadable script - based interpreter of another kind. This is important because different script loaders (in particuar with different dynamic libraries referenced) will be used in different contexts. Another possibility is that a custom object is assigned to this property, usually in the initialization stage of the current interpreter. More...

ScriptLoaderBase	ScriptLoader `[get]`
	Gets the script loader that is used by the current command-line interpreter for dynamically loading commands from scripts. More...

SortedList< string, IpcStreamServerBase >	PipeServers `[get]`
	Array of registered pipe servers, accessible through server name. More...

SortedList< string, IpcStreamClientBase >	IpcClients `[get]`
	Array of registered pipe clients, accessible through client name. More...

Properties inherited from IG.Lib.ICommandLineApplicationInterpreter
string	Name `[get, set]`
	Name of the current interpreter. More...

string	Description `[get, set]`
	Description of hte current interpreter. More...

CommandStackFrame	GlobalFrame `[get]`
	Global frame where global variables are stored. More...

CommandThread	MainThread `[get]`
	Main command thread of the interpreter (usually run in the same thread where interpreter was created). More...

int	NumCommandThreads `[get]`
	Returns the number of command threads that are currently contained on the interpreter. More...

bool	Exit `[get]`
	Whether the exit flag is set, usually causing interpreter to stop. More...

int	OutputLevel `[get, set]`
	Level of output for some of the interpreter's functionality (e.g. asynchronous command execution). More...

bool	WarnCommandReplacement `[get, set]`
	Specifies whether a wrning should be launched whenever an installed command is being replaced. More...

LoadableScriptInterpreterBase	LoadableScriptInterpreter `[get, set]`
	Interprater based on dynamically loadable scripts. This enables installation and running of commands that are based on C# code that is dynamically compiled. Ihe object is created on first get access if it has not been assigned before. This property can be overridden in derived classes such that getter creates a dynamically loadable script - based interpreter of another kind. This is important because different script loaders (in particuar with different dynamic libraries referenced) will be used in different contexts. Another possibility is that a custom object is assigned to this property, usually in the initialization stage of the current interpreter. More...

Properties inherited from IG.Lib.ILockable
object	Lock `[get]`

Detailed Description

Command line application interpreter that contains some neural networks - related commands.

Constructor & Destructor Documentation

IG.Lib.NeuralApplicationInterpreter.NeuralApplicationInterpreter ( )

inline

IG.Lib.NeuralApplicationInterpreter.NeuralApplicationInterpreter ( bool caseSensitive )

inline

Parameters

caseSensitive

References IG.Neural.NeuralApplicationCommandsTadej.InstallCommands().

Member Function Documentation

override string IG.Lib.NeuralApplicationInterpreter.CmdAbout	(	CommandThread	commandThread,
		string	cmdName,
		string[]	args
	)

inlineprotectedvirtual

Execution method that prints some information about the application.

Parameters

commandThread	Command thread that is being executed.
cmdName	Command name.
AppArguments	Command arguments.

Reimplemented from IG.Lib.CommandLineApplicationInterpreter.

The documentation for this class was generated from the following file:

extensions/iglibneural/neural/application/NeuralApplicationInterpreter.cs

Public Member Functions

Protected Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation