Class List

Here are the classes, structs, unions and interfaces with brief descriptions:

[detail level 12345]

▼NHelloVTKForm
CForm1
CProgram
▼NIG
►NCrypto
CConstCrypto	Contains constants for cryptographic operations from shell functions.
CCryptoManager	Performs high level cryptographic opereratins, such ass reading command-line parameters and performing high-level tasks that can be directly used in application commands (i.e. those commands that are installed on applicaition interpreters).
CCryptoParameters	This class contains key parameters of the cryptographic operations performed on some item
CPasswordAlgorithmBase	Base class for algorithms that generate passwords, encryption initialization vectors, and salts from the specified keys/passwords and salts.
CPasswordAlgorithmDeriveBytes	Key generation algorithm that uses a Rfc2898DeriveBytes object (PBKDF2 algorithm).
CPasswordAlgorithmNone	Key generation "algorithm" that generates key as an (eventually padded and truncated) copy of its original bytes.
CPasswordAlgorithmRfc2898	Key generation algorithm that uses a Rfc2898DeriveBytes object (PBKDF2 algorithm).
CUtilCrypto	Basic Cryptographic utilities.
►NExt
►NForms	Interface implemented by file viewers (usually GUI components).
►NTest
CColorConverterForm
CIgFormsQickTests
CMessageBoxBuilder
CAlignmentControl	Control for setting horizontal and vertical alignment of items.
CAlignmentControlOld	Control for adjusting alignment
CAlignmentTestForm	Test form, used only to test if control can be inclded in the form..
CAppTestForms	Test application for forms. Usage: AppTestForms.Init().
CAssemblyInfoControl
CAssemblyInfoForm
CAssemblySelector
CBrowserSimpleControl
CBrowserSimpleForm
CBrowserSimpleWindow
CConsoleForm	Console replacement.
CControlManipulator	Performs various operations on the specified controls:
CControlPropertyStore	Stores properties of a specified control, and restores them to on arbitrary controls
CControlViewerControl
CControlViewerForm	Windows form (System.Windows.Forms.Form) that can launch and show arbitrary controls and can create them if necessary.
CCookingTimerControl
CCookingTimerForm
CDialogControl	Highly configurable interactive message box with custom buttons, message, and possibly editable text.
CDialogForm
CDialogFormDemoControl
CDialogFormDemoForm
CDirectorySelector
CDllSelector
CFadingMessage	Manages a fading message window. Windows containing a message are launched in separate threads, closing after a specified time.
CFadingMessageOld	Manages a fading message window. Windows containing a message are launched in separate threads, closing after a specified time.
CFileSelector
CFileViewerControl
CFileViewerForm
CFontEventArgs	EventArgs class that contains font information.
CFontSelectorSimple	Simple control that allows font selection.
CGraphWindowTemplate_Old	Form used for plots.
CHashControl
CHashForm
CIClosableFromContainedForm	Marker interface indicating that a form can be closed from the contained control.
CIFileViewer
CImageViewerControl
CImageViewerForm
CIndexChangeEventArgs	Event arguments for events bearing information about an index (of type int) that has changed
CIndicatorLight
CIndicatorLightTestControl
CIndicatorLightTestForm
CInpuOrOutputtDataDefinitionControl	Control for editing input or output data definitions (only one of these two at a time)
CInputOutputDataDefinitionControl
CInputOutputDataDefinitionForm
CInputParametersControl	Control for editing input parameter values.
CInputParameterSelectorMinMax	Selection of parameter to be varied, together with bounds - for parametric tests.
CIReporterConsoleForm
CIReporterFadeMessage
CIReporterMessageBox
CIReporterSpeech
CMessageBoxLauncher	An exemple form that launches various message boxes
COutputValueSelector	Selection of the output value of interest in an ANN model.
►CReporterConf	Reporter configuration.
CConsoleWritingStream	A stream that redirects its input to the console.
CReporterConfigurationForm	Reporter configuration.
CReporterConsoleMsgbox
CReporterConsoleMsgbox_Base	Base class for reporter classes that contain either reporting via system console, reporting via message box, or both.
CReporterForms	Reporting system that in particular utilizes forms. Beside the main delegates for assembling location and message strings, this class has three additional delegates for each kind of reporting (i.e. reporting with console consform, message box, fading message or console)
CReporterMsgbox
CReportMsg_Examples
CResourceSelector
CResourceViewerControl
CResourceViewerForm
CScalarFunctionEvaluatorControl	Control for test evaluation of scalar functions
CScalarFunctionEvaluatorForm	Control for test evaluation of scalar functions
CScalarFunctionScriptControl	Control for definition of scalar functions by user defined expressions (through a script loader).
CScalarFunctionScriptForm	Window for definition of scalar functions by user defined expressions (through script loader).
CSoundPlayerControlSimple
CSoundPlayerFormSimple
CTestControl	Test control.
CTestForm	Test form.
CTestLayoutControl
CTestLayoutForm
CTestTestControl
CTimerControl
CTimerForm
CUtilForms	Various forms utilities.
CUtilResponseForms	Utilities that enable uniform behavior of response plotting forms.
CValueChangeEventArgs	Event arguments for events bearing information about a value of type double that has changed
CValueChangeEventArgs< ValueType >	Event arguments for events bearing information about value that has changed
CVectorFunctionPlotter1d	Form for training artificial neural networks.
CVectorFunctionPlotter1dForm
CVectorFunctionPlotter2d	Form for simple parametric tests (variation of selected parameter) performed on ANN models.
CVectorFunctionPlotter2dForm
CVectorFunctionScriptControl
CVectorFunctionScriptForm
CWindowPositioner	Takes care of windows positioning, relative of absolute to the screen and/or other windows.
CWindowPositionerControl	Control for testing window positioning.
CWindowPositionerForm	Windows form for testing window positioning./summary> $A Igor xx Oct09;
CWindowShiftControlNumeric	Control for setting window positions, relative positions, sizes, positions, shifts, etc.
CWindowShiftControlText	Control for setting window positions, relative positions, sizes, positions, shifts, etc.
CXMLTestPath
CXMLTestPathForm
►CXMLTreeView	Summary description for XMLTreeView.
CNodeData
►CXmlTreeViewControl
CNodeData
CXmlTreeViewForm
►CXMLTreeViewFormOld_Keep_Some_time	Summary description for XMLTreeView.
CNodeData
►NGr
CGraphicLineBase	Base class for graphic line primitive.
CGraphicObject	Graphic object, a tree - like collection of graphic primitives.
CGraphicPointBase	Base class for graphic line primitive.
CGraphicPrimitive	Abstract base class for all graphic primitives such as lines, facets, etc.
CGraphicPrimitiveBase	Base class for graphic primitives.
CGraphicPrimitiveSimple	GraphicPrimitive that has a protected Coordinates[] array.
CGraphicQuadriLateralBase	Base class for graphic line primitive.
CGraphicSetBase	Base class for graphic sets that contain groups of graphic primitives.
CGraphicTriangleBase	Base class for graphic line primitive.
CGrFillSettings	Fill Settings.
CGrLinesettings	Line Settings.
CGrPlottingBase	Base class for plotting graphic objects.
CGrPointSettings	Point Settings.
CGrPrimitiveSettings	Settings for graphic primitive.
CGrTextSettings	Text Settings.
CIGraphicPrimitive
CIGraphicSet	Graphic set that contain graphic primitives and other graphic sets.
CIGrsettings
CLinePrimitive
CMesh	Base class for all mesh classes.
CMesh2D
CMesh3D
CPlot2dTestZedgraph	Contains the Main1 function that performs some tests on 2D plotting with Zedgraph.
CPlotter
►CPlotterZedGraph	Plotter class that uses a ZedGraphControl object for plotting ordinary 2D graphs.
CExampleSineFunctionForLissajous	Sine function with the specified frequency factor and phase. Used in the ExampleLissajous.
CPlotZedGraphBase	Base class for plots that are shown in a ZedGraphControl object.
CPlotZedgraphCurve	Curve plots that is shown on a ZedGraphControl object.
CPointPrimitive
CQuadriLateralFacePrimitive
CStructuredSurfaceGridPrimitive
CStructuredSurfaceMesh3D
CSurfaceGridPrimitive
CSurfceMesh3D	Surface mesh in 3 dimensions.
CTextPrimitive
CTrilateralFacePrimitive
CZedGraphWindow	Window form containing a Zedgraph control for plotting graphs.
►NGr3d
CExampleValueFunctionDiff3D
CGraph3dManipulator	Basic control for manipulating 3D graphics.
CGraph3dManipulatorBasic	Basic manipulation of VTK-based 3D hraphs.
CGraph3dManipulatorExtended	Extended control for manipulation of 3D VTK graphics. Contains the standard control plus additional buttons for access to some VTK functions.
CGraph3dManipulatorWindow	A form for manipulation of 3D graphics.
CGraph3dManipulatorWindowExtended	A form for manipulating 3D graphics.
CI3dGraphicsControl	Interface for 3D graphics controls that can be manipulated via a standard set of commands for rotation etc.
CIVtkFormContainer	This interface is implemented by the forms that contain the VTK control that can render VTK graphics.
CIVtkFormContainerGen< VtkControlType >	This interface is implemented by the forms that contain the VTK control that can render VTK graphics.
►CTestVtkGraphicBase	Tests of 3D graphics enabled by ActiViz (VTK wrapper library).
CCustomImplicitFunction	An vtkImplicitFunction class that represents a custom function of 3 variables used for plotting contours.
CUtilVtk	Various VTK utilities that extend functionality of the ActiViz VTK wrappers.
CVtkContourPlot	Plots contours on surfaces in 3D.
CVtkControlBase	Basic control encapsulating the VTK's render control of type Kitware.VTK.RenderWindowControl.
CVtkControlWin	Control for presenting VTK graphics, intended for use in stand-alone windows.
CVtkCurvePlot	Handles 3D curve plots in VTK render window accessed through the VtkPlotter class
CVtkDecorationHandler	Manipulates axes, labels, grids, and other decorations of graphhics plotted in VTK windows.
CVtkForm	Windows form for presenting VTK graphics
CVtkFormPlain	Windows form for presenting VTK graphics
CVtkFormsExamples	Examples from VTK forms
►CVtkPlotBase	Base class for plotting classes that plot on VTK windows (class VtkPlotter)
CExampleFunc2dLinear	Function f(x,y)=x+y.
CExampleFunc2dShifted	Function defined as some other function shifted for the specified value.
CExampleFunc2dSquare	Function f(x,y)=x*x+y*y.
CExampleFunc2dXY	Function f(x,y)=x*y.
CExampleFuncDiff	Difference between the two auxiliary functions.
CExampleFunctionTorusKnot	Functions for all 3 co-ordinates of parametric curve definition of a p-q torus knot . Used in the ExampleCurvePlotTorusKnot.
CExampleSineFunctionForLissajous	Sine function with the specified frequency factor and phase. Used in the ExampleLissajous.
CExampleValueFunctionDiff21	3D function of coordinates that returns difference between func2 and func1 at the first two coordinates
CFunc2dX	2D function that returns the first parameter. Used as the first componnet of parametric definition of surfce that is defined by a single function of 2 variables.
CFunc2dY	2D function that returns the second parameter. Used as the second componnet of parametric definition of surfce that is defined by a single function of 2 variables.
CFunc2dZero	Auxiliary 2D function that returns 0.
CFunc3dZ	3D function that returns the third component of its 3D vector argument. Used e.g. for coloring graphs by heights.
CFunc3dZero	3D function that returns 0. Used e.g. for coloring graphs by heights.
CVtkPlotExamples	Examples for using classes derived from VtkPlot.
►CVtkPlotter	Plotter class that uses a vtkRenderWindow object for plotting 3D graphics.
CAccessor	Class that is used to access the VtkPlotter's window in classes that are not derived from that class. Access can be granted by either inheriting from this class or by uding this class as proxy class
CVtkSurfacePlot	Handles surface plots in VTK render window accessed through the VtkPlotter class
CVtkSurfacePlotBase	Contains basic settings for various surface and contour plots.
CVtkTestClass1	For performing quick tests. Delete this later!
CVtkVolumeContourPlot
CVtkVolumePlot
►NLib
►NCopy
CClienServerStreamBase	Base class for client and server classes with stream-based communication.
CClientServerStreamBase2	Base class for named pipe servers and clients, contains common stuff for both.
CClientStreamBase	Client to the pipe server (classes derived from ClientServerStreamBase2).
CNamedPipeClientBase	Client to the pipe server (classes derived from ClientServerStreamBase2).
CNamedPipeServerBase	Server that creates a named pipe, listens on its input stream, and sends responses to the client.
CServerStreamBase	Server that creates a named pipe, listens on its input stream, and sends responses to the client.
►NOld
CIReporter	Interface from which all reporters inherit.
CReporter	Base IG class for reporting, tracing and logging; provides a global reporter and a basis for creation of local reporters. This class is identical to the IGLib class (copied directly). IN EFA, refer to the derived class Reporter!
CAlignment	Defines alignment (vertical and horizontal) of some object.
CApp	Base class for all application classes. Provides some basic functionality such as keeping information about the application, managing application directories and basic files, etc.
CApplicationCommandlineBase	Base class for main application classes that have the main method of the application based on command line interpreter.
CAppTest
CArrayDto< ElementType, ElementBaseType, ElementDtoType >	Data transfer object for holding arrays of objects of the same type.
CArrayDto< ElementType, ElementDtoType >	Data transfer object for holding arrays of objects of the same type.
CBoundingBoxDto	Data Transfer Object (DTO) for bounding boxes of type IG.Num.BoundingBox. Used to store, transfer, serialize and deserialize objects of type BoundingBox.
CBoundingBoxDtoBase	DTO (data transfer object) for vector interface (IVector).
CBoundingBoxDtoBase< BoxType >	Base class for various DTO (Data Transfer Objects) for bounding boxes. Used to store a state of a bounding box.
CCharacterBuffer	CharacterBufferInterface wrapper for StringBilder.
Ccolor	Extended color representation. Stores RGB components and opacity as double numbers ranging fom 0 to 1. Implicit conversions to and from System.Drawing.Color and form System.Drawing.KnownColor are provided.
CColorScale
CColorScaleBase
CCommandAdapterSingleThreaded	Adapter class that wraps a single threaded command delegate and provides a multithreaded function.
CCommandLine	Represents a single command-line that can be executed. $A Igor Feb09;
►CCommandLineApplicationInterpreter	Simple command-line application interpreters, holds a set of commands that can be executed by name. Each of these command can take an arbitrary number of string arguments. Interpreter has its internal variables, which are strings. Each variable has a name and a value. If any arguments (and even command) start with the '$' character then then it is treated as reference to a variable and is substituted with the value of that variable (whose name follows the '$' character) before it is used.
CInterpreterPipeClient	Client to the interpreter pipe server (classes derived from InterpreterPipeServer).
CInterpreterPipeServer	Command-line interpreter's server that creates a named pipe, listens on its input stream for client requests, executes requests in the corresponding interpreter, and sends responses back to the client.
CCommandLineApplicationScriptInterpreter	Command-line interpreters adapted for executing script commands.
CCommandLineData	Holds execution data (command arguments ns result) for interpreter commands of the CommandLine type.
CCommandLineInterpreter	Base class for all command line interpreters.
CCommandLineJobContainer	Carries command execution data, results, and other data such as identification number, etc
CCommandStackFrame	Stack frame for a block of command-line interpreter commands.
CCommandStackFrame< InterpreterType >	Stack frame for a block of command-line interpreter commands.
CCommandStackFrame< InterpreterType, ThreadType >	Stack frame for a block of command-line interpreter commands.
CCommandStackFrameBase	Base class for classes of type CommandStackFrame{InterpreterType, ThreadType}see cref=""/>. Contains everyting that does not depend on specific type of generic parameters.
CCommandThread	Contains stack frames and other command thread data for a single command thread of a command-line interreter.
CCommandThread< InterpreterType >	Contains stack frames and other command thread data for a single command thread of a command-line interreter.
CCommandThread< InterpreterType, FrameType, ThreadType >	Contains stack frames and other command thread data for a single command thread of a command-line interreter.
CCommandThreadBase	Base class for classes of type CommandThread{InterpreterType, FrameType, ThreadType}. Contains everything that is not dependent on generic frame and other parameters.
CCommandUseReference	A reference of command usage, contains ID of the interpreter where a command is registered, and command name under which command is registered on that interpreter. Objects of this class are immutable.
CCons	Utilities for reading from a console. Just an alias for UtilConsole.
CCounterVar
CCsvData	Memory representation of CSV data.
CDataStore	XML-based data class. Doc container is accessed through the Doc property, which is of class XmlData, an extension of XmlDocument.
CExpressionEvaluatorCompiled	Base class for expression evaluators that utilize the functionality of CodeDomProvider class.
CExpressionEvaluatorJint	JavaScript Evaluator with command-line interpreter, based on Jint.
CExpressionEvaluatorJs	JavaScript Evaluator with command-line interpreter.
CHtmlConst	Contains a number of important constants used in Html.
CHtmlWriter	Generates and composes a HTML document.
CICharacterBuffer	Interface for all implementations of read-write character buffer. Classes that implement this interface are used e.g. in string parsing and output data formatters.
CICharacterBufferReadOnly	Interface for all implementations of read-only character buffer. Classes that implement this interface are used e.g. in string parsing and output data formatters.
CIColorScale
CICommandLineApplicationInterpreter	Interface for simple command-line applicatino interpreters.
CIdGenerator	Utility class for generaton of unique IDs for objects of specific type. IDs generated by calls of GetNewId() from a specific object of this class are unique. Utilizes definition of IIdentifiable interface. Implementation notes: In every class whose instances should have unique IDs, instantiate a private static object of this type, and an instance member of the Proxy subtype of this class. Both objexts should be instantiated by appropriate initializers, and constructor of the proxy object should be called with static object as argument. Example implementation can be found in the ExampleInterfaceImplementation subclass of this class.
CIdProxy	Proxy class that stores the object's unique ID (generated by a static instance of the IdGenerator class) and provides functionality of IIdentifiable.
CIFromXml	Defines classes whose instances can be converted to Xml elements. Conversion is different from that used in serialization.
CIIdentifiable	Classes whose instances have unique integer IDs.
CIInterpreter< TCommand, TCommandData >
CIInterpreterCommand
CIInterpreterCommandData
CILoadableScript	Interface for classes that can be dynamically loadeded from scripts and run, which provides functionality of dynamic scripting. It is recommendable to derive all such classes from the LoadableScriptBase base class.
CILoadableScriptC	Controllable loadable script, provides more control over loading and execution.
CILoadableScriptInterpreter	Interface for interpreters that can install commands from loadable scripts and run them.
CILockable	Lockable object, has a Lock property that returns object on which lock must be performed in order to lock the object.
CIndexList	Index list, a sorted list of unique integer indices. Used for tasks such as filtering specified element from a list of elements or a general data set.
CIndexListDto	Data Transfer Object (DTO) for index lists of type IndexList. Used to store, transfer, serialize and deserialize objects of type IndexList.
CInterfaceInterpreterBase	Base class for interfaces with interpreters.
CInterfaceInverse	Interface for Inverse Interpreter.
CInterpreterBase< TCommand, TCommandData >
CInterpreterCommandBase
CInterpreterCommandDataBase
CInterpreterVariable	Base class for interpreter variables.
CIObjectStore< T >	Object store. Objects of the specified type can be stored here for later reuse (efficiency improvement).
CIpcStreamClientBase	Client to the pipe server (classes derived from IpcStreamClientServerBase2).
CIpcStreamClientServerBase	Base class for client and server classes with stream-based communication.
CIpcStreamClientServerBase2	Base class for named pipe servers and clients, contains common stuff for both.
CIpcStreamServerBase	Server that creates a named pipe, listens on its input stream, and sends responses to the client.
CIRegisterable< T >	Objects of this type have a unique ID (unique for all objects of a given type) and can be registered in the register of existent objects of the specified type. Implementation notes: Registerable.Example contains an example of how to do that, or can even be inherited to provide all functionality automatically (but this may not be feasible because multiple inheritance is not supported, and our class already inherits form another one).
CIReporter	Interface from which majority of reporters inherit. Includes generic reporting functionality plus tracinf plus reportinf to files.
CIReporterBase	Interface from which all reporters inherit.
CIReporterConsole
CIReporterTextLogger	Reporters that utilize logging messages to files. IReporterTextLogger typically outputs (to a file) messages in one-line format with possibility to define indentation, while IReporterTextWriter typically outputs multi-line messages formatted for increased visibility.
CIReporterTextWriter	Reporters that utilize writing messages to files. Messages are typically formatted as multi-line messages with distinctive markup. For one-line possibly indented messages, IReporterTextLogger should be used.
CIReporterTrace	Reporters that utilize system's trace utility.
CISerializationDto< Type >	Generic base class for Data Transfer Objects (DTO). This class is used as template for producing concrete DTO classes. Such DTOs are used for serialization and deserialization of state of various kinds of objects that need to be transfered between applications, across platforms, or simply stored in files for future use.
CISerializationDto< Type, BaseType >	Interface for Data Transfer Objects (DTO). This class is used as template for producing concrete DTO classes. Such DTOs are used for serialization and deserialization of state of various kinds of objects that need to be transfered between applications, across platforms, or simply stored in files for future use. WARNING: In most cases ISerializationDto{Type} will be used. Different BaseType and Type are used only in relatively rare cases where different derived types all have the same data that is copied to DTO. Otherwise the advantage of this can not be used because of single inheritance.
CISerializationDtoAux< Type >	This interface facilitates use of static helper methods for copying on the SerializationDtoBase class. Contains those methods of ISerializationDto that don't use BaseType.
CISerializationDtoTyped
CISerializer	Interface for helper classes that perform serialization/deserialization of objects.
CISettingsRreader	Interface for settings readers, which read pairs key/vvalue from various files or configuration servers. Intended for simple configurations!
CISettingsServer
CIStringParsable	Defines classes that can be converted to strings and whose values can be parsed from strings. This is used e.g. in interpreters and in variable storage systems.
CIStringParser	String Parsers and Formatted Writers.
CIToXml	Defines classes whose instances can be created from Xml elements. Conversion is different from that used in serialization.
CITypedSerializable	Interface for classes whose type information can be stored in the corresponding data transfer objects (DTOs) when copying contents to DTOS. This enables deserialization of serialized objects that is type dependent, without knowing in advance what is the type of serialized objects.
CITypeName	Classes that provide separate type names. Classes used e.g. in interpreter systems to represent types of variables, implement this interface.
CIVarType	Defines classes that can represent variables of different types. Used e.g. in interpreters and variable storing systems.
CIWaitCondition	Interface for classes that implement blocking until a specified condition is met.
CIWaitFileEvent	Interface for classes that provide waiting for specific file events (such as ceration or deletion of a specific file or directory).
CIXmlConvertable	Defines classes that can be converted to/from Xml elements.
CJsonFormatter	Formatting of JSON strings into human readable form.
►CKeyValueSortable< Tkey, Tvalue >	Class representing a key-value pair where sorting can be performed both with respect to key and with respect to value.
CComparerBase	Base class for different IComparer classes.
CComparerKeyBase	IComparer that compares the key first and then eventually the value and finally the additional ordering parameter, dependent on constructor parameters.
CComparerValueBase	IComparer that compares the key first and then eventually the value and finally the additional ordering parameter, dependent on constructor parameters.
CListDto< ElementType, ElementBaseType, ElementDtoType >	Data transfer object for holding lists of objects of the same type.
CListDto< ElementType, ElementDtoType >	Data transfer object for holding data from lists of objects of the same type.
CLoadableRealFunctionBase	A RealFunction class used as base class for dynamically loaded functions. Bunctions loaded from scripts will inherit from this class, which enables script writers to assemble just the minimum necessary amount of code.
CLoadableScalarFunctionBase	A ScalarFunction class used as base class for dynamically loaded scalar functions. Functions loaded from scripts will inherit from this class, which enables script writers to assemble just the minimum necessary amount of code.
►CLoadableScriptBase	Base class for classes that can be dynamically loadeded from scripts and run, which provides functionality of dynamic scripting. It is recommendable to derive all such classes that implement the ILoadableScript interface from this base class.
CScript_CommandAdapter	Adapts that converts internal script commands (delegate of type Script_CommandDelegate) to interpreter commands
CStoredScriptSettings	In methods of this class you will find all the settings that apply to this script.
CLoadableScriptInterpreterBase	Interpreter that can install commands from dynamically loaded (compiled) scripts and run them. Script loader object of a type is accessed through a property that can be overridden in derived classes, such that a different script loader is used. This is importand because different libraries will be required for compilation in different contexts. Script loader property creates a new script loader on first access.
►CLoadableScriptOptBase	Base class for loadable scripts for optimization problems. AGREEMENTS: The first argument to initialization and executable method is working directory where data between different applications is exchanged. If overrigding the InitializeThis(string[])(...) method, call the base class' method first, and keep the agreement that the first argument must be the working directory. When implementing the executable (see RunThis()) method, its first argument should also be the working directory (the same as for initialization). This is to enable use of the class in scenarios where initialization and execution arguments must be the same.
CAnalysisScript
CLoadableScriptOptShellBaseControllable	Controllable version of LoadableScriptOptBase, implements the ILoadableScriptC interface.
►CLoadableScriptOptTest	Test optimization script cls.
CLoadableScriptOptDerived
CLoadableScriptRealFunctionBase	Base class for loadable scripts that define real functions of one variable.
CLoadableScriptScalarFunctionBase	Base class for loadable scripts that define scalar functions of several variables.
►CLoadableScriptShellBase	Loadable script base class for the shell application that includes tols for definition of optiimization problems, definition of vector response functions, a couple of interfaces with simulation programs, etc. AGREEMENTS: The first argument to initialization and executable method is working directory where data between different applications is exchanged. If overrigding the InitializeThis(...) method, call the base class' method first, and keep the agreement that the first argument must be the working directory. When implementing the executable (RunThis(...)) method, its first argument should also be the working directory (the same as for initialization). This is to enable use of the class in scenarios where initialization and execution arguments must be the same.
CStoredScriptSettings	In methods of this class you will find all the settings that apply to this script.
CLogger	Temporary logging of errors, warnings and infos for later processing. It is used to log multiple events in order to be processed (reported or otherwise) later.
CLogRecord	Single record for temporary logging.
CMatrixDto	Data Transfer Object (DTO) for matrixs of type IG.Num.Matrix. Used to store, transfer, serialize and deserialize objects of type IMatrix.
CMatrixDtoBase	DTO (data transfer object) for matrix interface (IMatrix).
CMatrixDtoBase< MatrixType >	Base class for various matrix DTO (Data Transfer Objects) for matrixs. Used to store a state of a matrix.
CModule	General module (or library) management class, a base class for specific module classes. Provides some basic functionality such as keeping information about the module, managing module directories and basic files, etc. Global module object is not implemented (in contrary to global program object), but it should be implemented in speciffic module classes derived from this one.
CModuleBase	Manages basic program informatin and resources such as directories, expiration time, etc.
CModuleTest
CNamedPipeClientBase	Client to the pipe server (classes derived from IpcStreamClientServerBase2).
CNamedPipeServerBase	Server that creates a named pipe, listens on its input stream, and sends responses to the client.
CNamespaceDoc	This namespace contains those general classes for the IGLib base library that are not put into other base namespaces.
CNeuralApplicationInterpreter	Command line application interpreter that contains some neural networks - related commands.
CObjectRegister< T >	Provides implementation of register of objects of the specified type. Also generates unique IDs for objects of this type. This class utilizes implementation of IIdentifiable and IRegisterable interfaces. Implementation notes for IRegistable: For implementation, use a static instance of this class, and an a nonstatic instance of the IdProcy class (to generate and hold object's unique ID). subclass of this clas, initialized by that static instance. Example implementation can be found in the ExampleInterfaceImplementation subclass of this class.
CObjectStore< T >	Object store. Objects of the specified type can be stored here for later reuse (efficiency improvement). IMPORTANT: Override IsEligible(), NotEligibleMessage() and TryGetNew() and possibly TryStore() methods in derived classes when applicable.
CParser
CPipeClientBase	Client to the pipe server (classes derived from IpcStreamClientServerBase2).
CPipeServerBase	Server that creates a named pipe, listens on its input stream, and sends responses to the client.
CRealFunctionLoader	Dynamically generates IRealFunction classes from user definitions. User can define in string form how function, its derivative, second derivative, integral, or inverse function is calculated. Then this class can be used to compile these definitions in the wrapping script, which is then used to create the corresponding function objects.
►CRegisterableExamples	Contains examples od implementation of the IIdentifieble and IRegistrable interface. They utilize implementation of helper classes from this file..
CExampleIIdentifiable	Example implementation of IIdentifiable interface.
CExampleIRegistrable	Example implementation of IIdentifiable interface.
►CReporterBase	Base IGlib class for reporting, tracing and logging; provides a global reporter and a basis for creation of local reporters. This class is identical to the IGLib class (copied directly). IN EFA, refer to the derived class Reporter!
CTWClass	A class for storing TextWriters and some data associated with them (such as the name of the file from which a TextWriter was created), which enables searching on basis of this data.
CReporterConfSpeech	This class is extension of ReporterConf that enables reporting via speech.
CReporterConsole
CReporterConsole_Base	Base class for reporter classes that contain either reporting via system console, reporting via message box, or both.
CReporterConsoleMsgboxSpeech
CReporterConsoleMsgboxSpeech_Base	Base class for reporter classes that contain either reporting via system console, via message box, via speech, or any combination thereof.
CScalarFunctionLoader	Dynamically generates IScalarFunction classes from user definitions. User can define in string form how function, its derivative, second derivative, integral, or inverse function is calculated. Then this class can be used to compile these definitions in the wrapping script, which is then used to create the corresponding function objects.
CScalarVar	Scalar variable.
CScriptLoaderBase	Dynamically compiles, loads and instantiates classes of type ILoadableScript from files or from strings.
►CScriptLoaderIGLib	Base script loader class for IGLib.
CScriptLoaderTest	ScriptLoader used for testing.
CSerializationDto	Auxiliary base class for DTOs, contains some static methods. Provided for simplicity, such that one does not need to state type parameters
CSerializationDto< Type >	Generic base class for Data Transfer Objects (DTO). This class is used as template for producing concrete DTO classes. Such DTOs are used for serialization and deserialization of state of various kinds of objects that need to be transfered between applications, across platforms, or simply stored in files for future use.
CSerializationDtoBase< Type, BaseType >	Generic base class for Data Transfer Objects (DTO). This class is used as template for producing concrete DTO classes. Such DTOs are used for serialization and deserialization of state of various kinds of objects that need to be transfered between applications, across platforms, or simply stored in files for future use. WARNING: In most cases ISerializationDto type will be used. Different BaseType and Type are used only in relatively rare cases where different derived types all have the same data that is copied to DTO. Otherwise the advantage of this can not be used because of single inheritance.
►CSerializationDtoTypedBase< Type, BaseType >
CSerializationDtoTyped< CommonType >
CSerializationTester
►CSerializerBase	Base class for serialization helper classes.
CISerializationTestArrayMember	Interface for members of arrays in classes for testing serialization.
CISerializationTestClass	Interface for classes for testing serialization.
CSerializationTestArrayMember	Member of arrays in test classes for testing serialization.
CSerializationTestClass	Test class for testing serialization.
CTestClass	Simple class using for testing serialization.
CTestClassDerived	Simple derived class using for testing serialization.
CSerializerJson	Helper class for JSON serialization and deserialization. This class enables formatting of the generated JSON with propper indentation, which is not the case with its base class. JSON Serializer has several limitations, such as:
CSerializerJsonBase	Helper class for JSON serialization and deserialization. This class does not enable formatting of the generated JSON (no indentation etc.).
CSettingsReaderAppConfig	Provides functionality for retrieving settings from various sources such as application settings file.
CSettingsReaderBase
CSettingsServerBase
CShellApplication< InterpreterType >	Class encapsulating a command-line shell. Used as embedded shell application that can be installed on command-line interpreters and runnable scripts.
CSortedUniqueItemList< Type >	Sorted list of unique items. It is guaranteed that at all times the list of containing items is sorted.
CStopWatch1	Timer for measuring execution times and other intervals of time elapsed between successive events. $A Igor xx Apr10 Jun15;
►CStringParser	Parsig data from character arrays. Provides various parsing and writing utilities on character buffers. $A Igor Feb09;
CLocalizationExample
CStringTable	2D tables of data represented by strings. Maps to CSV files.
CTempFileStream	Temporary file stream. Based on a temporary file proveded by the system, which is automatically closed when the stream is closed.
CThreadPerformanceData	Stores results of performance test.
CThreadPerformanceTest	Used to measure performance of the currend thread. A standard unit operation is provided for which number of executions per second is measured. Beside number of unit operations per second, the ratio between the CPU time and the clock time is calculated, which gives the feeling of how much the processor on which the thread executes is loaded. Measurements can be performed by specifying the requested number of cycles, but also by specifying the requested time in seconds.
CThreadPulser	Launches (immediately upon creation) a thread that performs pulsing on its object. PulseAll is perfomed on its Lock object every time the object is pulsed from another thread. This object acts as kind of proxy for pulsing and provides the object used for locking and pulsing.
CTrackedThread	Tracked thread object that wraps a single created thread and enables that all active wrapped threads are are tracked (i.e. a list of all active tracked threads can be obtained at any time)
CUtil	General utilities.
CUtilConsole	Utilities for reading from a console.
CUtilCsv	Auxiliary utilities for dealing with files in CSV and other delimited formats
CUtilStr	Various string operations, random strings, random characters, etc.
►CUtilSystem	General utilities.
CMissingAssembly
CResolutionIdentity	Provides identity for assembly resolution attempts
CVarTypeBase	DO NOT USE! The base class implementing the IVarType interface.
Cvartypes
CVectorDto	Data Transfer Object (DTO) for vectors of type IG.Num.Vector. Used to store, transfer, serialize and deserialize objects of type Vector.
CVectorDtoBase	DTO (data transfer object) for vector interface (IVector).
CVectorDtoBase< VectorType >	Base class for various vector DTO (Data Transfer Objects) for vectors. Used to store a state of a vector.
CWaitCondition	Provides a framework for blocking execution until the specified condition becomes satisfied. Function Wait() does that. The function continuously check the unblocking condition until it becomes satisfied, sleeping a certain amount of time between consecutive checks. Time plan of checks (i.e. the amount of sleepin time between them) can be adjusted by public properties SleepFirst, MinSleepMs, MaxSleepMs, and MaxRelativeLatency. These properties can be adjusted while waiting. Blocking condition is evaluated by the (public) function Condition() and can be adjusted in one of the following ways:
CWaitConditionBase	Base class for objects that perform waiting until a condition is fulfilled.
CWaitDirectoryCreation	Blocking execution of the current thread until the specified directory begins to exist.
CWaitDirectoryCreationByProxy	Implements blocking until the specified directory is created (becomes existent). Directory is specified in constructor or by setting the DirectoryPath property. Waiting is performed by calling the Wait() function.
CWaitDirectoryCreationLatence	Implements blocking until the specified directory is created (becomes existent). Directory is specified in constructor or by setting the DirectoryPath property. Waiting is performed by calling the Wait() function. It is implemented by successively checking whether unblocking condition is fulfilled and by sleeping between checks. Therefore it has some latency (i.e. unblocking is not always performed immediatley the condition is met) and spends some CPU time and system resources.
CWaitDirectoryRemoval	Blocking execution of the current thread until the specified directory ceases to exist.
CWaitDirectoryRemovalByProxy	Implements blocking until the specified directory is deleted (becomes nonexistent). Directory is specified in constructor or by setting the DirectoryPath property. Waiting is performed by calling the Wait() function.
CWaitDirectoryRemovalLatence	Implements blocking until the specified directory is deleted (becomes nonexistent). Directory is specified in constructor or by setting the DirectoryPath property. Waiting is performed by calling the Wait() function. It is implemented by successively checking whether unblocking condition is fulfilled and by sleeping between checks. Therefore it has some latency (i.e. unblocking is not always performed immediatley the condition is met) and spends some CPU time and system resources.
CWaitFileCreation	Blocking execution of the current thread until the specified file begins to exist.
CWaitFileCreationByProxy	Implements blocking until the specified file is created (becomes existent). File is specified in constructor or by setting the FilePath property. Waiting is performed by calling the Wait() function.
CWaitFileCreationLatence	Implements blocking until the specified file is created (becomes existent). File is specified in constructor or by setting the FilePath property. Waiting is performed by calling the Wait() function. It is implemented by successively checking whether unblocking condition is fulfilled and by sleeping between checks. Therefore it has some latency (i.e. unblocking is not always performed immediatley the condition is met) and spends some CPU time and system resources.
CWaitFileEvent	Concrete class derived from WaitFileEventBase. It does not have a meaningful unblocking condition (it alwys evaluates to true), therefore the class can use WaitEvents() function but not Wait().
►CWaitFileEventBase	Base class for classes that provide blocking until a file or directory is created/removed.
CExample	Class containing examples for waiting creation or removal of files and directories.
CWaitFileEventBaseByProxy	Base class for classes that provide blocking until a file or directory is created/removed. This clas uses a proxy class for performing its basic operation.
CWaitFileEventBaseByProxyLatence	Base class for classes that provide blocking until a file or directory is created/removed. This clas uses a proxy class for performing its basic operation.
►CWaitFileEventLatenceBase	Base class for classes that impelement methods that block until a file or directory is created or deleted.
CExampleLatence	Class containing examples for
CWaitFileRemoval	Blocking execution of the current thread until the specified file ceases to exist.
CWaitFileRemovalByProxy	Implements blocking until the specified file is deleted (becomes nonexistent). File is specified in constructor or by setting the FilePath property. Waiting is performed by calling the Wait() function.
CWaitFileRemovalLatence	Implements blocking until the specified file is deleted (becomes nonexistent). File is specified in constructor or by setting the FilePath property. Waiting is performed by calling the Wait() function. It is implemented by successively checking whether unblocking condition is fulfilled and by sleeping between checks. Therefore it has some latency (i.e. unblocking is not always performed immediatley the condition is met) and spends some CPU time and system resources.
CXml	Supplemental basic XML node and document manipulation utilities. Contains some useful static methods for XML manipulation.
Cxml_generic
CXmlBuilder	Class that enables custom parsing and building of an Xml document.
CXmlData	XmlDocument extended by additional functionality for managing complex data units. In applications, this is used for
►CXmlParser	Base class for classes taht contain an Xml document that can be parsed. Provides comfortable utilities for transversing the document and for querying the value, name, and attributes of the current node.
CMark	Position mark in the XML document
CXmlUtilityBase	Base class for various utilities operating on XmlDocumnt.
►NNeural
CAnalysisFileServerNeural	Class containing direct analysis (in optimization) based on neural network optimization.
CApproximationFileServerNeural	Class for approximation file server.
CDataMapperIdentity
CDataMapperSimple
CFunc2dFromApproximator	Approximator function of 2 variables that is based on a general approximator function of vector argument.
CIDataMapper
CINeuralApproximatorContainer	Classes that contain neural approximator.
CInputMappingDefinitionElement	Input data element mapping definition for neural networks.
CMapDataDefinitionDto
CMapImputElementDefinitionDto	DTO (data transfer object) for neural data input element mapping definition.
CMapNeuralImputOutputElementDefinitionDto< ElementType >	DTO (data transfer object) for neural data element mapping definition.
CMapOutputElementDefinitionDto	DTO (data transfer object) for neural data output element mapping definition.
CMappingApproximationFileManager	File manager for mapping file client and server.
CMappingApproximationFileServerNeural	Class for mapping file server.
CMappingDefinition	Definition of input and output data mapping. Contains Mapped and Original Index, descriptiove information about individual eleemnts of input and output and default valuess.
CMappingDefinitionElement	Base class for input or output data element mapping definition.
CNeuraApproximationFileManager	File manager for neural network approximation file client and server.
CNeuralAllpicationCommands	Commands for application's interpreter for neural networks.
CNeuralApplicationCommandsTadej	Commands for application's interpreter for neural networks.
CNeuralApproximatorAforge	Approximator of response by using neural networks, based on the AforgeDotNet library. $A Igor Mar11;
CNeuralApproximatorAForgeDto	A data transfer object (DTO) for the NeuralApproximatorAforge class. $A Igor Mar11;
CNeuralFileConst	Constants used in definition of neural networks approximation servers and clients working through file system.
CNeuralTadej
COutputMappingDefinitionElement	Output data element mapping definition for neural networks.
►NNum
►NExperimental
►CExampleMathClassExperimental	Example class that derives from the M class. Implements a method that uses basic mathematical functions implemented in M.
CNested	A nested class that does not derive from the M class, but still statidc functions from that class can be used because it is embedded in that class.
CMX	Defines some mathematical functions to be used in derived classes. Beside the auxiliary functions already in class M, this class also defines functions that use type xdouble instead of double
Cxdouble	Extension of type double by a struct. Provides binary operaror ^ (left operand raised to the power of right operand).
CAffineTransformation	Implementation of a general affine transformation where dimensions of the original and transformed space can be different.
CAffineTransformationDiagonal	Affine transformation with diagonal tansformation matrix.
CAffineTransformationDiagonal0_TO_DELETE	Implementation of a general affine transformation.
CAffineTransformationSquare	Invertible Affine transformation with square transformation matrix.
CAnalysisBase	Base class for direct analysis classes that define optimization problems. Represent the complete definition of the optimization problem (without initial parameters). Concrete analysis classes (e.g. representing optimization examples or complex direct problems solved through numerical simulation) should be derived from this class.
CAnalysisComparer	Compares two sets of analysis results in various different ways.
CAnalysisRequestDto	DTO (Data Transfer Objects) for storing contents of direct analysis request (in optimization problems).
CAnalysisResults	Single objective optimization analysis results. Used to transfer parameters input (e.g. vector of parameters, request flags) to the analysis function and to store analysis output results (e.g. objective and constraint functions, their gradients, error codes, and flags indicating what has actually been calculated). REMARKS: Property CopyReferences specifies whether only references are copied when individial object fields are assigned and set (when the property is true), or values are actually copied (when false - deep copy). Each setter method also has the variant that always copies only the reference (function name appended by "Reference"). This makes possible to avoid duplication of allocated data and also to avoid having different data with the same references. AGREEMENTS: Optimization problem is defined as minimize f(x), subject to: c_i(x) less or equal 0, i=0...NI-1 c_j(x)=0, j=NI...NI+NE-1. Here x is vector of parameters, f(x) is the objective function, and c_i(x) and c_j(c) are constraint functions. NI is number of inequality constraints and NE is number of equality constraints. If there are equality constraints then they are listed after inequality constraints.
CAnalysisResultsDto	DTO (Data Transfer Objects) for storing contents of direct analysis request (in optimization problems).
CAnalysisResultsExtensions	Extension methods for analysis results classes.
CBoundingBox	Bounding box, defines lower and upper bounds on vector quantities such as coordinates of geometrix objects, bounds of domains, etc.
CBoundingBox1d	An 1D bounding box.
CBoundingBox2d	A 2D bounding box.
CBoundingBox3d	A 3D bounding box.
CBoundingBoxBase	Base class for bounding boxes that define minimal and maximal co-ordinates of objects, groups of objects, and regions in space.
CCholeskyDecomposition	Cholesky decomposition of a matrix. Available for symmetric positive definite matrices
CComposedFunction	Composition of real functions.
CConstMath	Mathematical and physical constants.
CConstMisc	Miscellaneous constants.
CConstPhysical	Physical constants including units and standard uncertainty.
CCounter	Represents a real number.
►CDistanceComparer< PointContainerType, PointType >	Class that is used to calculate and compare distances between point containers.
CStoredDistanceComparerClass	Compares two point containers according to their StoredDistance property.
CDistanceComparerSampledDataElement	Distance comparer for point clouds where point type is SampledDataElement.
CDistanceComparerVector
CEigenValueDecomposition	Eigenvalue decomposition of a matrix
►CExampleMathClass	Example class that derives from the M class. Implements a method that uses basic mathematical functions implemented in M.
CNested	A nested class that does not derive from the M class, but still statidc functions from that class can be used because it is embedded in that class.
CField1< TElement >	A generic field of values of any type. Values must be allocated at once.
►CField< TElement >	A generic field of values of any type. Values must be allocated at once.
CExampleClassScalarField	Example of a field class.
CFieldCollection2d< TField, TElement >	Collection of structured 2D fields of the same type. Fields are identified by their names
CFieldCollection3d< TField, TElement >	Collection of structured 3D fields of the same type. Fields are identified by their names
CFieldCollection< TField, TElement >	Collection of fields of the same type. Fields are identified by their names
►CFunc	Creation of a number of standard real mathematical functions in one dimension. Conttains subclasses for specific functions ans corresponding static creator methods. Creator methods come in 3 different version: for reference form of the function (e.g. just Exp[x]), for form shifted and stretched in x direction, and general form shifted and stretched in both directions.
CConstant	A RealFunction class representing a constant function.
CCubic	Cubic function, f(x) = a3*x*x*x + a2*x*x + a1*x + a0. Specific properties: Zero - returns a zero. Zero1 - returns the fierst zero. Zero2 - returns the second zero. Zero3 - returns the third zero. NumZeros - returns number of zeros (0, 1 or 3). HasZero - either the function has a zero or not. Min - returns function's strict minimum. Max - returns function's strict maximum.
CExp	A RealFunction class representing exponential function.
CIdentity	A RealFunction class representing identity (or linear) function.
CLinear	Linear function, f(x) = a1*x + a0. Specific properties: Zero - returns a zero. HasZero - either the function has a zero or not.
CPenaltyPower	Penalty function consisting of sticked together constant zero-valued function and a power function with positive integer exponent. Formula: hh*((x - xx0)/dd)^pp where: dd: Characteristic barrier length. Length of the interval on which function grows from 0 to characteristic height. hh: Characteristic barrier height. Value of the function at transition point plus characteristic length. xx0: Transition point where function starts to be non-zero. pp: Power. Must be greater than 0; for 2 first derivative is continuous in transition points, for 3 second derivative is also continuous, etc.
CQuadratic	Quadratic function, f(x) = a2*x*x + a1*x + a0. Specific properties: Zero - returns a zero. Zero1 - returns the fierst zero. Zero2 - returns the second zero. NumZeros - 0, 1 or 2, returns number of zeros. HasZero - either the function has a zero or not.
CReciprocalPower	A RealFunction class representing a reciprocal power function.
CWeightGauss	A RealFunction class representing bell like polynomial weighting function with finite support, based on Gaussian function (exp(-x^2)). Reference function: bell like function with infinite support, 0 less than |f(x)| less than or equal to 1 f(0) = 1
CWeightPol3	A RealFunction class representing bell like polynomial weighting function with finite support. Reference function: bell like function with final support, 0 less or equal |f(x)| less or equal 1 f(x less than -1) = f(x greater than 1) = 0 f(0) = 1
CWeightPol4	A RealFunction class representing bell like polynomial weighting function with finite support, based on 4th order polynomial. Reference function: bell like function with final support, 0 less or equal |f(x)| less or equal 1 f(x less than -1) = f(x greater than 1) = 0 f(0) = 1
CWeightPol5	A RealFunction class representing bell like polynomial weighting function with finite support, based on 5th order polynomial. Reference function: bell like function with final support, 0 less or equal |f(x)| less or equal 1 f(x less than -1) = f(x greater than 1) = 0 f(0) = 1
CWeightPol7	A RealFunction class representing bell like polynomial weighting function with finite support, based on 7th order polynomial. Reference function: bell like function with final support, 0 less or equal |f(x)| less or equal 1 f(x less than -1) = f(x greater than 1) = 0 f(0) = 1
CWeightReciprocalPower	A RealFunction class representing bell like polynomial weighting function with finite support, based on reciprocal power function (1/(1+|x|^p) where p>0 is an integer power). Reference function: bell like function with infinite support, 0 less than |f(x)| less than or equal to 1 f(0) = 1
CFunc2dBase	Base class for scalar functions of 2 variables (base for implementation of IFunc2d interface)
CFunc2dBaseNoGradient	Base class for scalar functions of 2 variables (implementations of the IFunc2d interface). that do not implement calculation of function Hessian (second derivatives) or gradient
CFunc2dBaseNoHessian	Base class for scalar functions of 2 variables (implementations of the IFunc2d interface). that do not implement calculation of the Hessian (second derivatives)
CFunc2dBasePlain_ToConsider	Base class for scalar functions of 2 variables
►CFunc2dExamples	Example classes of type Func2dBase.
CFunc2dXY	Function f(x, y) = x * y
CFunc2dFromScalarFunction	Scalar function of 2 variables that is based on a general scalar function of vector argument.
CFunc2dFromScalarScript	Scalar function of 2 variables that is generated from expressions for evaluation of function value, gradient components, etc.
CFunc2dLinear	Linear (Affine) function of 2 variables
CFunc2dQuadratic	Quadratic function of 2 variables
CFunc2dVectorFormBase	Base class for scalar functions of 2 variables (base for implementation of IFunc2d interface)
►CFunc3d2dBase	Base class for 3D vector functions of 2 variables (base for implementation of IFunc3d2d interface).
CComponentFunction1	Class that represents a scalar function of 2 variables that is the first component of the specified 3D vector function of 2 variables.
CComponentFunction2	Class that represents a scalar function of 2 variables that is the first component of the specified 3D vector function of 2 variables.
CComponentFunction3	Class that represents a scalar function of 2 variables that is the third component of the specified 3D vector function of 2 variables.
CComponentFunctionBase	Base function for component functions, provides internal variable for vector function.
CFunc3d2dBaseNoGradient	Base class for 3D vector functions of 2 variables (implementations of the IFunc3d2d interface) that do not implement calculation of function Hessian (second derivatives) or gradient.
CFunc3d2dBaseNoHessian	Base class for 3D vector functions of 2 variables (implementations of the IFunc3d2d interface) that do not implement calculation of the Hessian (second derivatives).
►CFunc3d2dExamples	Contains a number of example 3D vector functions of 2 variables
CCylinderParametric	Parametric equation of an origin-centered (ellipsoidal) cylindrical surface in form of 3D vector function of 2 variables.
CEllipsoidParametric	Parametric equation of an origin-centered ellipsoid surface in form of 3D vector function of 2 variables.
CEnneperSurface	Parametric equation of the Enneper surface, in form of 3D vector function of 2 variables.
CHyperbolicParaboloid	Surface that is a graph of the function z/c=x^2/a^2-y^2/b^2.
CHyperboloidParametric	Parametric definition of an origin-centered hyperboloid surface (x^2/a^2+y^2/b^2-z^2/c^2=1) in form of 3D vector function of 2 variables.
CHyperboloidParametric2	Alternative parametric definition of an origin-centered hyperboloid surface (x^2/a^2+y^2/b^2-z^2/c^2=1) in form of 3D vector function of 2 variables.
CHyperboloidParametricMinus	Alternative parameterization of an origin-centered hyperboloid surface (x^2/a^2+y^2/b^2-z^2/c^2=1) in form of 3D vector function of 2 variables
CHyperboloidParametricPlus	Alternative parameterization of an origin-centered hyperboloid surface (x^2/a^2+y^2/b^2-z^2/c^2=1) in form of 3D vector function of 2 variables
CHyperboloidTwosheetedLowerParametric	Parametric definition of an origin-centered upper two-sheeted hyperboloid surface (x^2/a^2+y^2/b^2-z^2/c^2-1) in form of 3D vector function of 2 variables.
CHyperboloidTwosheetedUpperParametric	Parametric definition of an origin-centered upper two-sheeted hyperboloid surface (x^2/a^2+y^2/b^2-z^2/c^2-1) in form of 3D vector function of 2 variables.
CKleinBottle	Defines the Klein's bottle (a parametric surface), a closed surface with no interior and exterior.
CKleinBottle1	Defines the Klein's bottle (a parametric surface), a closed surface with no interior and exterior.
CKleinBottle2	Defines the Klein's bottle (a parametric surface), a closed surface with no interior and exterior.
CMobiusStrip	Defines the Möbius strip (a parametric surface), a surface with only one side and only one boundary component.
CParaboloid	Surface that is a graph of the function z/c=x^2/a^2+y^2/b^2.
CParametricSurface	Base class for easy definition of parametric surfaces intended for plotting.
CSaddleXY	Parametric surface that is a graph of the function f(x,y)=x*y.
CSnailConicSpiral_ToCheck	Defines a parametric definition of a snail shell - like surface (a parametric surface) in form of 3D vector function of 2 variables
CSnailShell1	Definition of parametric surface that ressembles a snail's shell in form of 3D vector function of 2 variables.
CSnailShell1Streched	Definition of parametric surface that ressembles a snail's shell (a bit stretched along the axis) in form of 3D vector function of 2 variables.
CSphereParametric	Parametric equation of an origin-centered sphere.
CSurface	Base class for easy definition of surfaces defined through a function of 2 variables.
CTorus	Parametric equation of a toroid surface in form of 3D vector function of 2 variables
CTorusHorizontal	Parametric equation of a horizontal toroid surface in form of 3D vector function of 2 variables
CTorusVertical	Parametric equation of a horizontal toroid surface in form of 3D vector function of 2 variables
CUmbilicTorus	Parametric equation of the umbilic torus surface, a closed single-edged surface in 3D, in form of 3D vector function of 2 variables.
CFunc3dBase	Base class for scalar functions of 3 variables (base for implementation of IFunc3d interface)
CFunc3dBaseNoGradient	Base class for scalar functions of 3 variables (implementations of the IFunc3d interface). that do not implement calculation of function Hessian (second derivatives) or gradient
CFunc3dBaseNoHessian	Base class for scalar functions of 3 variables (implementations of the IFunc3d interface). that do not implement calculation of the Hessian (second derivatives)
►CFunc3dExamples	Example classes of type Func3dBase.
CFunc3dXYZ	Function f(x, y, z) = x * y * z
CFunc3dFromScalarFunction	Scalar function of 3 variables that is based on a general scalar function of vector argument.
CFunc3dFromScript	Scalar function of 3 variables that is generated from expressions for evaluation of function value, gradient components, etc.
CFunc3dLinear	Linear (Affine) function of 3 variables
CFunc3dQuadratic	Quadratic function of 3 variables
CFunc3dVectorFormBase	Base class for scalar functions of 3 variables (base for implementation of IFunc3d interface)
CFunctionPolynomial	Polynomial real functions of one variable.
Cgeom3	Provides static methods used in 3D
CGeometry3D	Provides static methods of 3D analytic geometry.
CGridGenerator1d	Generates 1D grids with equidistant or geometrically grown intervals.
CGridGenerator1dBase	Base class for 1D grid generators.
CGridGenerator1dFunc	Generates 1D grids with equidistant or geometrically grown intervals.
CIAffineTransformation	Affine Transformation.
CIAnalysis	Interface for direct analysis classes used in optimization problems.
CIAnalysisResults	Single objective optimization analysis results. Used to transfer parameters input (e.g. vector of parameters, request flags) to the analysis function and to store analysis output results (e.g. objective and constraint functions, their gradients, error codes, and flags indicating what has actually been calculated). REMARKS: Property CopyReferences specifies whether only references are copied when individial object fields are assigned and set (when the property is true), or values are actually copied (when false - deep copy). Each setter method also has the variant that always copies only the reference (function name appended by "Reference"). This makes possible to avoid duplication of allocated data and also to avoid having different data with the same references. In the beginning of analysis functions, call ResetResults().
CIBoundingBox	Bounding box, defines minimum and maximum co-ordinates of domains, geometric objects and their groups.
CIDistanceComparer< PointContainerType, PointType >	Interface used for distance comparers in point clouds
CIFunc2d	Represents scalar functions of 2 variables.
CIFunc3d	Represents scalar functions of 2 variables.
CIFunc3d2d	Represents 3D vector functions of 2 variables.
CIGridGenerator1d	Interface for 1d grid generators.
CILinearSolver	Classes that can be used for solution of linear systems of equations
CIMatrix	Real matrix interface.
CIMatrix< ComponentType >	Generic Matrix interface.
CINeuralApproximator	Approximator of response by using neural networks. $A Igor Mar11;
CINeuralModel	Interface for artificial neural network -based models that we can operate on.
CInputElementDefinition	Input data element definition for vector functions, approximations, etc.
CInputElementDefinitionDto	DTO (data transfer object) for data input element definition.
CInputOutputDataDefiniton	Definition of input and output data for vector functions, approximations, etc. Contains descriptiove information about individual eleemnts of input and output, default values and eventual bounds of input parameters, etc.
CInputOutputDataDefinitonDto	DTO (data transfer object) for data definition that contains input and output elements.
CInputOutputElementDefinition	Base class for input or output data element definition for vector functions, approximations, etc.
CInputOutputElementDefinitionDto< ElementType >	DTO (data transfer object) for data element definition.
CIOptimizationData	Information about optimization data and algorithm parameters.
CIOptimizationResults	Storage of optimization results. Stores optimal results, best current guess, etc.
CIOptimizer	Interface for optimization algorithms. $A Igor Feb10;
CIPenaltyEvaluator	Classes that evaluates penalty terms corresponding to a specific penalty function.
CIPointContainer< PointType >	Basic interface for point container classes.
CIRandomGenerator	Uniform random number generator.
CIRealFunction	Interface for real functions.
CIRealFunctionOneParametric	Parameterized real-valued functions of single variable.
CIRealFunctionParametric	Parameterized real-valued functions of single variable.
CIRealFunctionPenalty	Interface that must be satisfied by penalty functions. Penalty functions have small values where argument is less than 0, and grow fast where their argument is positive.
CIResponseEvaluatorVectorSimple	Interface for simulators and other systems (used e.g. for optimization) that can calculate vector response as a function of vector input parameters.
CIScalarFunction	Scalar functions of vector arguments, with eventual affine transformation of parameters. If transformation is defined then actual function is evaluated as reference function evaluated at inverse affine transformed parameters.
CIScalarFunctionOneParametric
CIScalarFunctionParametric	Parameterized scalar functions with affine transformation of coordinates.
CIScalarFunctionResults	Storage for results of a scalar function. Includes parameters at which function was (or should be) evaluated, flags specifying what has been and what should be evaluated, calculated value, gradient and Hessian of the function in the specified point.
CIScalarFunctionUntransformed	Scalar functions of vector arguments.
CIVector	Real vector intrface.
CIVector< T >	Generic Vector interface
CIVectorApproximator	Interface for vector function approximators.
CIVectorFunction	Vector function of a vector argument.
CIVectorFunctionResults	Vector function results. Used to transfer parameters input (e.g. vector of parameters, request flags) to the vector function and to store function output results (e.g. values, their gradients, error codes, and flags indicating what has actually been calculated). REMARKS: Property CopyReferences specifies whether only references are copied when individial object fields are assigned and set (when the property is true), or values are actually copied (when false - deep copy). Each setter method also has the variant that always copies only the reference (function name appended by "Reference"). This makes possible to avoid duplication of allocated data and also to avoid having different data with the same references. In the beginning of analysis functions, call ResetResults().
CLinearBasis	Vector function containing lineer basis in a n-dimensional vector space. Composed of n+1 functions: 1, x1, ..., xn.
CLinearBasisSafer	The same as LinearBasis, just that it has more meaningful error reporting (but is therefore slower).
CLinearSolverBase
CLUDecomposition	LU decomposition of a matrix
CM	Defines some mathematical functions to be used in derived and other classes
Cmat2	2D matrix, struct implementation.
Cmat3	3D matrix, struct implementation.
CMatrix	Real matrix class. Some operations are performed by the MathNet.Numerics.LinearAlgebra.Matrix class.
CMatrix2d	Matrix in a 2 dimensional space.
CMatrix3d	Matrix in a 3 dimensional space.
CMatrixBase	Base class for matrices.
CMatrixExtensions	Extension methods for IMatrix interface.
CMatrixStore	Matrix store
CMatrixStore< T >	Matrix store
CMExt	Defines some mathematical functions to be used in derived classes. In addition to functions defined in the M class, functions are defined under other names, and some additional functions are also defined
CNamespaceDoc	This namespace contains various numerical classes.
CNeuralApproximatorAforgeFake
CNeuralApproximatorAForgeFakeDto	A data transfer object (DTO) for the NeuralApproximatorAforge class. $A Igor Mar11;
CNeuralApproximatorAforgeIT	Approximator of response by using neural networks, based on the AforgeDotNet library. $A Igor Mar11;
CNeuralApproximatorBase	Base class for neural network approximators.
CNeuralApproximatorDtoBase	A data transfer object (DTO) for neural approximation classes that implement the INeuralApproximator interface. $A Igor Mar11;
CNeuralApproximatorDtoBase< Type >	A data transfer object (DTO) for neural approximation classes that implement the INeuralApproximator interface. $A Igor Mar11;
CNeuralTrainingLimits	Contains Parameters that define neural network architecture limits and trainig parameter limits
CNeuralTrainingLimitsDto	Transfer Object (DTO) for neural network training limits.
►CNeuralTrainingParameters	Contains Parameters that define neural network architecture and trainig procedure, together with achieved results after training such as various error norms
CComparerBase	Base comparer class (implementation of the IComparer{NeuralTrainingParameters} interface) for conmparing objects of type NeuralTrainingParameters
CComparerErrorTrainingVector
CComparerTrainingTime
CNeuralTrainingParametersDto	Transfer Object (DTO) for neural network training set.
CNeuralTrainingTable	Contains Parameters that define neural network architecture and trainig limits, together with achieved results after training such as various error norms
CNeuralTrainingTableDto	Transfer Object (DTO) for neural network training results.
CNonSIUnit	Non-SI units whose use is not encouraged or not allowed
CNumeric
COptFileAnalysisClient	File analysis client. Passes direct analysis request to the server and gets analysis results from it.
COptFileAnalysisServer	File analysis server. Performs direct analyses by request.
COptFileConst	Constants used in definition of optimization servers and clients working through file system.
COptFileManager	Performs elementary operations for optimization and analysis servers and clients that exchange data and messages through files. Each such server can serve a single request at a time (single thread of execution). Client-server pair (or pairs, when both analysis and optimization are performed in this way) has (or have) a single directory for exchanging data and messages. If there is a need for analyses running in parallel, each thread must have its own directory and its own client-server pair.
COptimizationData	Information about optimization data and algorithm parameters.
COptimizationDataBase	Base class for holding information about optimization data and algorithm parameters.
COptimizationResults
COptimizationResultsBase	Base class for storage of optimization results. Stores optimal analysis results, best current guess, etc.
COptimizerBase
COutputElementDefinition	Input data element definition for vector functions, approximations, etc.
COutputElementDefinitionDto	DTO (data transfer object) for data output element definition.
CParallelJobContainerBase	Contains input data and results of a parallel job to be executed, oropertied indicating the state of the job, and methods for interaction with job performer and dispatcher.
CParallelJobContainerGen< InputType, ResultType >	General purpose parallel job container that contains methods for running the job in on the same machine thread. Contains many auxiliary methods for testing and for adaptation of parallel jobs concepts to different tasks
CParallelJobDispatcherBase	Base class for parallel job dispatchers. Accepts job requests and dispatches jobs to parallel job servers when available and redy to run a job.
CParallelJobDispatcherBase< JobContainerType >	Parallel job dispatcher. Accepts job requests and dispatches jobs to parallel job servers when available and redy to run a job.
CParallelJobDispatcherGen< InputType, ResultType >	Parallel job jerver for job containers that inherit from ParallelJobContainerGen{InputType, ResultType}.
CParallelJobDispatcherGen< InputType, ResultType, JobContainerType >	Parallel job dispatcher for job containers that inherit from ParallelJobContainerGen{InputType, ResultType}.
CParallelJobServerBase< JobContainerType >	Parallel job server. Waits for job requests and executes them in a parallel thread.
CParallelJobServerGen< InputType, ResultType >	Parallel job server for job containers that inherit from ParallelJobContainerGen{InputType, ResultType}.
CParallelJobServerGen< InputType, ResultType, JobContainerType >	Parallel job server for job containers that inherit from ParallelJobContainerGen{IT,RT}.
CPenaltyEvaluator	Evaluation of penalty functions.
CPhysicalConstant	Data of a physical constant, including its value, standard error, units, symbol and description. This is alro used for derived SI units and non-SI units.
CPhysicalUnit	SI units (basic and derived)
CPointCloud< PointContainerType, PointType >	Cloud of points, contains a list of containers of objects that include point coordinates.
CPointCloud< PointLinkType, PointContainerType, PointType >	Cloud of points, contains a list of containers of objects that include point coordinates.
CPointCloudSampledDataElement	Cloud of points where each point is represented by the IVector object, contains a list of containers of vector objects that include point coordinates.
CPointCloudVector	Cloud of points where each poinr is represented by the IVector object, contains a list of containers of vector objects that include point coordinates.
CPointContainer< PointContainerType, PointType >	Container class that contains a single point plus all the data that are necessary for searching and re-connecting operations on points.
CPointContainer< PointLinkType, PointContainerType, PointType >	Container class that contains a single point plus all the data that are necessary for searching and re-connecting operations on points.
CPointContainerSampledDataElement	Container class that contains a single vector point plus all the data that are necessary for searching and re-connecting operations on points.
CPointContainerVector	Container class that contains a single vector point plus all the data that are necessary for searching and re-connecting operations on points.
CPointLink< PointContainerType, PointType >	Contains a pointer (link) to another point container.
CPointLink< PointLinkType, PointContainerType, PointType >	Contains a pointer (link) to another point container.
CQRDecomposition	QR decomposition of a matrix
CQuadraticBasis	Vector function containing quadratic basis in a n-dimensional vector space. Composed of (n+1)*(n+2)/2 functions: 1, x_1, ..., x_n, 0.5*x_1^2, 0.5*x_2^2, ..., 0.5*x_n^2, x_1*x_2, x_1*x_3, ..., x_1*x_n, ..., x_2*x_3, ..., x_2*x_n, ..., ..., x_n-1*x_n.
CQuadraticBasisSafer	The same as QuadraticBasis, just that it has more meaningful exceptions.
CRandGeneratorThreadSafe	Generator of uniformly distributed random numbers. Based on the default random generator. Instance members are thread safe!
CRandomGaussian	Gaussian random number generator.
CRandomGenerator	Default generator of uniformly distributed random numbers. Provides a global generator and a static function for generating new generators. Currently, the generator used is the system's generator built in C#.
CRandomGeneratorSystem	Generator of uniformly distributed random numbers. Based on system random generator. WARNING: Instance members are not guaranteed to be thread safe!
CRealFunction	Represents a real function of a real variabe.
CRealFunctionBase	Base class for real functions of real variable.
CRealFunctionOneParametric	Base class for one parametric families of real-valued functions of single variable. Parameters that completely define the function out of parametric family of functions can be queried or set.
CRealFunctionParametric	Base class for parameterized real-valued functions of single variable. Parameters that completely define the function out of parametric family of functions can be queried or set. Parameters are represented and stored as vector.
CRealFunctionParametricBase	Base class for parameterized real-valued functions of single variable. Parameters that completely define the function out of parametric family of functions can be queried or set.
►CSampledDataCsv	Base class for CSV (comma separated files) representation, importer and exporter of sampled data and data definitions.
CDataColumnDefinition	Used to define which columns in a data table correspond to which input or output elements.
CSampledDataElement	A single element of a sampled data, contains vector of input parameters and vector of output values.
CSampledDataElementDto	DTO (data transfer object) for sampled data element (one point with vectors of input and output parameters).
►CSampledDataSet	Sampled data consisting of elements of which each contains vector of input parameters and output values
CComparerInputDistance	Comparer that compares two data elements of type SampledDataElement according to the distance of their input parameter vectors to a specified reference point (vector) in the input parameter space
CComparerOutputDistance	Comparer that compares two data elements of type SampledDataElement according to the distance of their output values vectors to a specified reference point (vector) in the output values space
CSampledDataSetDto	Data Transfer Object (DTO) for sampled data set.
CScalar	Represents a real number.
CScalarFunctionBase	Base class for scalar functions with affine transformation of co-ordinates. The reference function is defined while the actual function is defined as that reference function of transformed coordinates. If transformation is not specified then function reduces to the reference one.
CScalarFunctionConstant	Constant scalar function of vector variable. Function is evaluated according to f(x) = c where x is vector of parameters, and c is the constant scalar term (function value at x=0).
►CScalarFunctionExamples	Various examples of scalar functions.
CParaboloidSymmetric2D	Symmetric paraboloid centered at coordinate origin. f(x,y) = x^2 + y^2 - R2. If R2 is positive then 0-level is a circle, if it is negative then the paraboloid does not intersect with zero-plane. Default is R2 = 1 (default constructor).
CQuadratic2d	Example quadratic polynomial in 2D. f(x,y) = 2*x^2 + y^2 + x*y + x + y + 10.
CQuadratic3d	Example quadratic polynomial in 3D. f(x,y,z) = x*x + 2*y*y + 4*z*z + x*y + 2*y*z + 4*z*x + x + y + z + 10
CRosenbrock	RosenBrock function. f(x,y) = (1-x)^2 + 100 * (y-x^2)^2
CRosenbrockGeneralizedAdjacent	Generalzed multivariate RosenBrock function for Dim >= 2
CRosenbrockGeneralizedExhaustive	Generalzed multivariate RosenBrock function for Dim >= 2
CScalarFunctionLinear	Linear scalar function of vector variable. Function is evaluated according to q(x) = b^T*x + c where x is vector of parameters, b is vector of linear coefficients (gradient at x=0) and c is the scalar term (function value at x=0).
CScalarFunctionOneParametric	Base class for one parametric families of scalar functions with affine transformation of co-ordinates. Parameters that completely define the function out of parametric family of functions can be queried or set. Affine transformation of coordinates is included: the reference function evaluation must be defined while the actual function is defined as that reference function of transformed coordinates. If transformation is not specified then function reduces to the reference one.
CScalarFunctionParametric	Base class for parameterized scalar functions with affine transformation of co-ordinates. Parameters that completely define the function out of parametric family of functions can be queried or set. Parameters are represented and stored as vector. Affine transformation of coordinates is included: the reference function evaluation must be defined while the actual function is defined as that reference function of transformed coordinates. If transformation is not specified then function reduces to the reference one.
CScalarFunctionParametricBase	Base class for parameterized scalar functions with affine transformation of co-ordinates. Parameters that completely define the function out of parametric family of functions can be queried or set. Affine transformation of coordinates is included: the reference function evaluation must be defined while the actual function is defined as that reference function of transformed coordinates. If transformation is not specified then function reduces to the reference one.
CScalarFunctionQuadratic	Quadratic scalar function of vector variable. Function is evaluated according to q(x) = (1/2)*x^T*G*x + b^T*x + c where x is vector of parameters, G is constant Hessian matrix, b is vector of linear coefficients (gradient at x=0) and c is the scalar term (function value at x=0).
CScalarFunctionRadial	Radial scalar functions.
CScalarFunctionRadialOneParametric	Base class for one parametric families of radial scalar functions with affine transformation of co-ordinates. Parameters that completely define the function out of parametric family of functions can be queried or set. Affine transformation of coordinates is included: the reference function evaluation must be defined while the actual function is defined as that reference function of transformed coordinates. If transformation is not specified then function reduces to the reference one.
CScalarFunctionRadialParametric	Parametric scalar function.
CScalarFunctionRadialUntransformed	Radial scalar functions.
CScalarFunctionRadialUntransformedOneParametric	One parametric radial scalar function (dependent on one tunning parameter).
CScalarFunctionResults	Storage for results of a scalar function. Includes parameters at which function was (or should be) evaluated, flags specifying what has been and what should be evaluated, calculated value, gradient and Hessian of the function in the specified point.
CScalarFunctionScriptController	Class for building scalar functions from scripts, used by GUI elements.
CScalarFunctionScriptControllerBase< ScalarFunctionType >	Base class for building scalar functions from scripts. This is currently an interrmediate class between the DTO and scalar function, and will probably be gradually replaced.
CScalarFunctionScriptDto	DTO (data transfer object) for vector interface (IVector).
CScalarFunctionScriptDtoBase< FunctionControllerType >	Base class for various DTO (Data Transfer Objects) for scalar function controllers. Used to store a state of a scalar function.
CScalarFunctionTransformed	Scalar function that is defined as some reference function evaluated at inverse affine-trasformed parameters. This class is typically used to convert scalar functions without affine transformation of coordinates (interface IScalarFunctionUntransformed) to those that support affine transformation of coordinates.
CScalarFunctionUntransformedBase	Base class for defining scalar functions without possibility of affine transformation of parameters.
CSimKosecConst	Constants for (optimization) interface with the simulation code of Gregor Kosec.
►CSimKosecFileManagerBase	File manager for interfacing (for optimization purposes) the simulation code of Gregor Kosec.
CInputFieldDefinition	Contains data about a field that is recoginzed in the input file, such as field identification number, name, and description. This class is immutable except for Description, and it is thread safe in the scope of intended use.
CSimKosecFileManagerConv2	Interface with simulator of G. Kosec for convection problems in a cave with 2 obstacles.
CSimKosecFileManagerConv3	Interface with simulator of G. Kosec for convection problems in a cave with 3 obstacles.
CSimKosecFileManagerConvBase	Base class for interface with simulator of G. Kosec for convection problems in a cave with obstacles.
CSingularValueDecomposition	Singular value decomposition of a matrix
CSIPrefix	SI prefixes for producing multiples of the original units (such as kilo- or micro-).
CSpeedTestCpu	Various utilities for testing computational speed of the current system.
CStructuredField2d< TElement >	Field where field elements are arranged in a 2 dimensional array. Usually represents a field over a structured 2D mesh
CStructuredField3d< TElement >	Field where field elements are arranged in a 3 dimensional array. Usually represents a field over a structured 3D mesh
CStructuredMesh2d3d	2D structured mesh in 3D
CStructuredMesh2d< TCoord, TIndexField, TIndex, TScalarField, TScalar, TVectorField, TVector, TTensorField, TTensor >	Generic 2D structured mesh with collections of named scalar, vector, tensor and index fields
CStructuredMesh3d	Structured mesh in 3D
CStructuredMesh3d< TCoord, TIndexField, TIndex, TScalarField, TScalar, TVectorField, TVector, TTensorField, TTensor >	Generic 3D structured mesh with collections of named scalar, vector, tensor and index fields
CStructuredMeshGeometry2d< TCoord >	Structured mesh geometry in 2 dimensions.
CStructuredMeshGeometry3d< TCoord >	Structured mesh geometry in 3 dimensions.
CTestClass
CTestTrainingParametersComparers	Class for testing of Comparers for NeuralTrainingParameters.
CUnstructuredMesh1d2d	Unstructured mesh in 1D embedded in 2D space
CUnstructuredMesh1d3d	Unstructured mesh in 1D embedded in 3D space
CUnstructuredMesh1d< TCoord, TIndexField, TIndex, TScalarField, TScalar, TVectorField, TVector, TTensorField, TTensor >	Generic 1D unstructured mesh with collections of named scalar, vector, tensor and index fields
CUnStructuredMesh2d	2D structured mesh
CUnstructuredMesh2d	Unstructured mesh in 2D
CUnstructuredMesh2d< TCoord, TIndexField, TIndex, TScalarField, TScalar, TVectorField, TVector, TTensorField, TTensor >	Generic 2D unstructured mesh with collections of named scalar, vector, tensor and index fields
CUnstructuredMesh3d	Unstructured mesh in 3D
CUnstructuredMesh3d< TCoord, TIndexField, TIndex, TScalarField, TScalar, TVectorField, TVector, TTensorField, TTensor >	Generic 3D unstructured mesh with collections of named scalar, vector, tensor and index fields
CUnstructuredMeshGeometry1d< TCoord >	Geometry and topology of an unstructured 1D mesh. Presents both connected meshes and unconnected sets of points.
CUnstructuredMeshGeometry2d< TCoord >	Geometry and topology of an unstructured 2D mesh. Presents both connected meshes and unconnected sets of points.
CUnstructuredMeshGeometry3d< TCoord >	Geometry and topology of an unstructured 2D mesh. Presents both connected meshes and unconnected sets of points.
CUtilMath
Cvec2	2D vector, struct implementation.
Cvec3	3D vector, struct implementation.
CVector	Real vector class.
CVector2d	Vector or point in a 2 dimensional space.
CVector3d	Vector or point in a 3 dimensional space.
CVectorApproximatorBase	Base class for vector function approximators.
CVectorBase	Base class for real vectors.
CVectorExtensions	Extension methods for vector classes.
CVectorFunctionBase	Base class for defining Vector functions whose evaluation is defined in bulk, and evaluation of individual components can not be performed directly. For these functioons, individual values and individual gradient or vector components are evaluated in such a way thet the function is first evaluated as whole, storing its results to an object implementing IVectorFunctionResults.
CVectorFunctionBaseComponentWise	Base class for defining Vector functions whose component-wise evaluation is defined directly.
►CVectorFunctionBaseGeneral	Base class for VectorFunctionBase and VectorFunctionBaseComponentwise. In general, use and in order to derive from.
CObjectStoreResults	Storage for IVectorFunctionResults objects.
►CVectorFunctionExamples	Various vector function examples.
CRosenrockAndCircle	Example - 2 component vector function of 2 variables. The first component is the Rosenbrock function and the second component is a radially symmetric paraboloid with radius 2 of the zero contour, centered at coordinate origin.
CVectorFunctionFromScalar
CVectorFunctionRequestDTO	DTO (Data Transfer Objects) for storing contents of vector function evaluation request.
CVectorFunctionResults	Vector function results. Used to transfer parameters input (e.g. vector of parameters, request flags) to the vector function and to store function output results (e.g. values, their gradients, error codes, and flags indicating what has actually been calculated). REMARKS: Property CopyReferences specifies whether only references are copied when individial object fields are assigned and set (when the property is true), or values are actually copied (when false - deep copy). Each setter method also has the variant that always copies only the reference (function name appended by "Reference"). This makes possible to avoid duplication of allocated data and also to avoid having different data with the same references. In the beginning of analysis functions, call ResetResults().
CVectorFunctionResultsDto	DTO (Data Transfer Objects) for storing contents of vector function results.
CVectorFunctionScriptController	Class for building vector functions from scripts, used by GUI elements.
CVectorFunctionScriptControllerBase< VectorFunctionType, ScalarFunctionControllerType, ScalarFunctionType >	Base class for building vector functions from scripts. This is currently an interrmediate class between the DTO and a vector function, and will probably be gradually replaced.
CVectorFunctionScriptDto	DTO (data transfer object) for vector interface (IVector).
CVectorFunctionScriptDtoBase< FunctionControllerType, ScalarFunctionControllerType, ScalarFunctionDtoType >	Base class for various DTO (Data Transfer Objects) for scalar function controllers. Used to store a state of a scalar function.
CVectorStore	Vector store
CVectorStore< T >	Vector store
►NPlot2d
CGraphBase	Graph data & control class.
CGraphItem	Base lass for all items that can be put on a graph (including axes, labels, etc.).
CGraphLineItem	Plottable item that consists of multiple line segments.
CGraphNPlot	NPlot graphs plotting object.
CGraphPlotItem	Representation of a plottable item contained in a graph. This excludes markup markups such as axes, legends, etc.
CGraphWindowNPlot	Stand-alone graph window using NPlot as plotting engine. For layout, GraphWindowTemplate class is inherited.
CGraphWindowTemplate	Template for stand-alone graph windows.
CIGraph	Interface for graph plotting objects.
CIGraphItem	Interface for all items that can be put on a graph (including axes, labels, etc.).
CIGraphPlotItem	Represents a plottable item contained in a graph. This excludes markup markups such as axes, legends, etc.
CPlotControlNPlot	Windows forms control that can be used for plotting 2D graphs.
►NReporterMsgForms
CReporterConfSpeech	This class is extension of ReporterConf that enables reporting via speech.
CReporterConsoleMsgboxSpeech
CReporterConsoleMsgboxSpeech_Base	Base class for reporter classes that contain either reporting via system console, via message box, via speech, or any combination thereof.
►NScript
CAppBase	Base cls. for application scripts that can also be used on its own.
CAppExtBase	Internal script for running embedded applications.
CLoadableScriptExample	Example cls. for testing function of loadable scripts.
►CLoadableScriptShellNeural	Base class for loadable scripts that are used as custom applications that inclued neural networks approximations and optimization.
CStoredScriptSettings	In methods of this class you will find all the settings that apply to this script.
►CLoadableScriptShellNeuralBase	Base class for loadable scripts that are used as custom applications that inclued neural networks approximations and optimization.
CStoredScriptSettings	In methods of this class you will find all the settings that apply to this script.
CLoadableScriptSpecialFunctionBase	Base cls. for various special function loadable scripts.
CScriptAppBase	Partial class definition containing tests of CSV utilities
CScriptGraphics2dBase	Base class for script classes with 2D graphics examples.
CScriptGraphics3DBase	Base class for script classes with graphics examples.
►CScritpRealFunctionExample	Example script for definition of a new real function class.
►CContainer	Container class inherits from M in order to enable use of comfortable mathematical functions.
CFunction
►CScritpScalarFunctionExample	Example script for definition of a new real function class.
►CContainer	Container class inherits from M in order to enable use of comfortable mathematical functions.
CFunction
CTestIglibExt_ToDelete	Base class for script classes with graphics examples.
▼NJsonPrettyPrinterPlus
►NJsonPrettyPrinterInternals
►NJsonPPStrategies
CCloseBracketStrategy
CCloseSquareBracketStrategy
CColonCharacterStrategy
CCommaStrategy
CDefaultCharacterStrategy
CDoubleQuoteStrategy
COpenBracketStrategy
COpenSquareBracketStrategy
CSingleQuoteStrategy
CSkipWhileNotInStringStrategy
CICharacterStrategy
CJsonPPStrategyContext
CPPScopeState
►NJsonSerialization
CJsonExtensions
CJsonPrettyPrinter
CPrettyPrinterExtensions
▼NReportMsg_Examples
CReportMsg_Examples
▼NTestSqlXml
CReporter_Test
▼NTSTX
CTest1
▼NUnitTests_ReporterMsg
CReporterTest	This is a test class for ReporterTest and is intended to contain all ReporterTest Unit Tests /summary>
▼NXMLTree